Trawler Example – Intermediate System

Overview

This trawler intermediate monitoring system will monitor the propulsion engine, generator, generator power, shore power, 4 tanks, the house battery bank, 5 different temperatures around the boat, 3 bilge compartments, and GPS data including position, SOG, and COG. Information is displayed at the helm using a 8” touchscreen and from the owner’s cabin using a 5.7” display. Alarms are programmable and sounded at the helm and owners cabin via the annunciators or buzzers. The WiFi / router allows data to be displayed onboard through a PC, smartphone or tablet device and with an Internet connection, the data can be viewed remotely.

The following table shows the products included within this example system plus a list of the information or data available for display.

Product	Description	Available Data List
TSM800C	nav. station display	Displays data in this list, video feeds, monitors the data and controls the alert system
N2KView	Vessel montoring and control software	PC onboard, at home, or at office monitors and displays data in this list
IPG100	N2K to ethernet	NMEA 2000 to ethernet gateway
E2500	Wifi router	Allows monitoring wirelessly or wired onboard, or remotely with internet connection
MCS-25GB	Real Time Cloud Service	Subscription service that allows real time access to the vessel from anywhere in the world with internet connection
ALM100	Helm buzzer	Sounds a loud buzzer when any monitored data in this list goes outside programmed limit
GPS200	Cabin top GPS	Position, speed over ground, course over ground, time, date, magnetic variation and more
SSC300	Compass	Monitors magnetic heading, rate of turn and pitch and roll
DSM250	Cabin Display	Displays data in this list, monitors the data and sounds the ALM100 if there is a problem
ALM100	Cabin buzzer	Sounds a loud buzzer when any monitored data in this list goes outside programmed limit
J2K100	Engine Monitor	Monitors RPM, boost and oil pressure, oil and coolant temp, voltage, fuel rate, hours
J2K100	Generator Monitor	Monitors RPM, oil pressure, coolant temp, voltage, current, frequency
ACM100	Shore power monitor	Monitors voltage, current, frequency and power
FPM100	Tank Monitor	Monitors levels in 2 fuel tanks, 2 fresh water tanks, 1 black water and 1 gray water tanks
DCM100	Battery monitor	Monitors battery voltage, current, temperature, state of charge and time remaining
TMP100	Temperature monitor	Monitors cabin temperature, engine room temperature, alternator temperature, refrigerator temperature, exhaust gas temperature
SIM100	Switch indicator	3 high bilge water indicators, magnetic door switch, smoke/heat detector, CO detector
RIM100	Run indicator	Monitors 3 bilge pumps for breaker status and pump run status, counts and times pump runs

Downloads

- N2KBuilder file

This file requires Maretrons free NMEA 2000^® network design tool N2KBuilder^® to be installed on your PC.

DSM250 Screenshots

The following screenshots are examples of how monitored data can be displayed on the DSM250.

Alternator Temperature Gauge

Battery Current Gauge

Battery Parameters

Battery State Of Charge Gauge

Battery Temperature Gauge

Battery Voltage Gauge

COG Course Up Rose

Depth Digital

Depth Graph

Distance to Empty and Time To Empty

Engine Battery Voltage Gauge

Engine Coolant and Oil Gauges

Engine Fuel Economy and Trip Fuel Used

Engine Fuel Rate

Engine Hours

Engine Pressure and Load Gauges

Engine Sea and Coolant Temperatures

Engine Tachometer Gauge

Exhaust Gas Temperature Gauge

Fresh Water Gauges

Fuel Burn Vessel Speed with Distance to empty

Fuel Gauge

Fuel Remaining in Tanks and Total

Fuel Tank Gauges and Total

Fuel Total Level Gauge

Generator Battery Voltage

Generator Coolant and Oil Gauges

Generator Current

Generator Frequency

Generator Fuel Burn Rate

Generator Hours

Generator Pressure and Load Gauges

Generator Tachometer Gauge

Generator Voltage Gauge

GPS Status

Gray and Black Water Gauges

Heading Cardinal

Heading Head Up Rose

Heading North Up Rose

Inclinometer

Lat Lon

Local Time and Date

Moon

Pitch and Roll

Rate of Turn

Refrigerator Temperature Gauge

Run Counter and Timer

Run Indicators Off

Run Indicators On

Sea Temperature Digital

Shore Power Current

Shore Power Frequency Gauge

Shore Power Parameters

Shore Power Voltage Gauge

Shore Total Power Used

SOG and COG Digital

SOG Gauge

Speed Over Ground Gauge

Speed Over Ground Gauge Blue Color Background

Speed Over Ground Gauge Inverse Blue Color Background

Speed Over Ground Gauge Inverse Color Background

Speed Over Ground Gauge Inverse Green Color Background

Speed Over Ground Gauge Inverse Red Color Background

Speed Over Ground Gauge Red Color Background

STW Digital

STW Gauge

Sunrise and Sunset

Switch Indicators Off

Switch Indicators Off Color

Switch Indicators On

Switch Indicators On Color

Time and Distance to Empty

Total Tank Remaining with Individual tank Remaining

Trip Log and Total Log

UTC Time and Date

Variation

N2KView components

<div

The following components are examples of how monitored data can be displayed on the TSM800C using N2KView. The components are arranged on favourite screens at positions and sizes to suit the user’s needs. See N2KView web page for examples of full screenshots.