DSM250

Multi-function color display

Discontinued – Please consider DSM570

Maretron's DSM250 is a high-resolution sunlight viewable color display that allows easy interpretation of NMEA 2000^® instrument and navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad.

Unlike traditional single-display units, DSM250 users can choose numeric, gauge, or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.

The DSM250 will directly connect with any NMEA 2000^® network and display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable.

The DSM250 displays a multitude of information including AC power, battery, depth, engine, environment, fuel management, GPS, heading, navigation, rudder, speed, tanks, time, transmission, weather, wind and more.

Alerts

The DSM250 now includes a comprehensive, flexible alert capability. Configure audio and visual alerts on virtually any data that the DSM250 is capable of monitoring. Available alert types include:

The DSM250 is capable of sharing alert information with other DSM250 units as well as any DSM410 and N2KView^® installations on the network. An alert defined on any device can be acknowledged on any other device on the network. Following is a screenshot of a shallow water alert:

Once the alert appears, you simply press the "Enter" key twice to see the Alert Status screen, shown here:

Maretron's DSM250 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance.

The DSM250 is available in two different color cases: black or gray.

Examples of data that the DSM250 can display are:

AC power (Average Frequency, Voltage and Current, Phase-Neutral Frequency, Voltage and Current, Phase-Phase Frequency, Voltage and Current
Anchor Watch
Battery / DC (Voltage, Current, Battery Temperature, Battery State of Charge, Battery Time Remaining, Ripple Voltage, Power)
Depth (Water Depth, Depth below Transducer)
Electrical (Resistance)
Electrical Distribution (Switch/Breaker, Breaker Current, On/Off/Error Counters, On/Off/Error Timers)
Engine Monitor (Boost Pressure, Hours, Coolant Pressure, Coolant Temperature, Exhaust Gas Temperature, Fuel Pressure, Fuel Rate, Oil Pressure, Oil Temperature, Tachometer, Tilt/Trim, Voltage, Fuel Ecomony, Fuel Consumption, Percent Load, Percent Torque, Trip Fuel Used, Warning Indicators)
Environment (Barometer, Heat Index, Humidty, Temoperatures, Wind Chill)
Fluid Flow (Flow Rate, Trip Volume)
Fuel management (Distance to Empty, Time to Empty, Total Fuel Capacity, Total Fuel Level, Total Fuel Consumption, Total Trip Fuel Used, Total Fuel Economy, Total Fuel Renmaining)
GPS (COG, Lat/Lon, SOG, Satellites, Time, Accuracy)
Heading (Heading, Rate of Turn, Variation)
Humidity (Inside, Outside, User Defined
Indicators (Status, , On/Off/Error Counters, On/Off/Error Timers)
Mechanical (dB, Force, Strain)
Motion (Acceleration, Angle, Angular Velocity, Angular Acceleration, Distance, Rotation Rate, Velocity)
Navigation (BOD, BTW, COG, XTE, DTW, ETA, Lat/Long, Rolling Road, Set/Drift, SOG, TTG, VWG, Waypoint Number and Name)
Pressure / Vacuum
Rudder
SMS (Status, Signal Strength)
Speed (Through Water, Over Ground, Total Log, Trip Log)
Tanks (Capacity, Level, Remaining)
Time (Local, UTC, Moon Phase, Sunrise, Sunset, Twilight)
Transmission (Gear, Oil Pressure, Oil Temperature, Warning Indicators)
Vessel (Heave, Pitch, Roll, Trim Tabs, Keel)
Watermaker (Sea Recovery Status display)
Wind (Apparent direction and speed, True direction and speed, Groud direction and speed)

The following accessories are available for the DSM250:

Package of (2) DSM250 Covers - Black

Part Number: DSM250CVR2PK-01

Package of (2) DSM250 Covers - Gray

Part Number: DSM250CVR2PK-02

A PC based simulator for the DSM250 may be downloaded by clicking the following link.

DSM250 Demonstration Software version 1.8.4.6


Surface Mount	Flush Mount

Note: Maretron monitoring sensors are updated using Maretron’s N2KAnalyzer application on a PC paired with an approved NMEA 2000® gateway.

1.8.3.2 (2020-08-14) – Current Release

Support DSM570, TSM810C, TSM1210C, MBB300C configurations
For FFM100 configuration menu, always display K-Factor as 1000 when the K-Factor on FFM100 is 1000. This corrects an issue caused after load default to FFM100 and the DSM display the old K-Factor value before loading default, this issue also fixed in the FFM100 SW 1.4.1.1
Support CLM100 SW 1.2+
Support CLM100 configuration for Battery, Engine, Transmission, and Vessel Devices

1.7.5.3 (2017-12-27)

Support invalid data in LAT/LON screen (Bug #4405)
Correctly display 129029 in LAT/LON screen (Bug #4418)
Fix crash in control mode set anchor position (Bug #4421)

1.7.3.1 (2017-07-25)

Update Fluid Type List (Bug #4260, #4261)
Re-enable restore factory defaults menu to IPG100 configurations (Bug #4268)

1.7.2.2 (2017-05-12)

Correct issue which cause DSM250 does re-start after shut down (Bug #4230)

1.7.2.1 (2017-05-02)

Support 130312 with source from 0 to 14 (Bug #4041)
Total Fuel Rate support both 127489 and 127497 (Bug #4053)
Correct return data in function get_DISP_FUEL_ECO_CON which cause issue on Total Fuel Economy and related Fuel Management data which base on Total Fuel Economy (Bug #4174)
Correct mode string for TLA100 configuration menu
Support Heartbeat PGN (126993) (Buf #4214)
Support variable transmission settings for TLA, RAA, TLM (Bug #4215)
Support DSM410 configurations (Bug #4217)
Cannot recreate the issue of Bug #3288 on FFM100 SW 1.3.1.1 when flash DSM250 SW 1.7.1.1
Support ARC100 configurations (Bug #4218)
Correct SMS Test Message limit (Bug #4180,4182)
Support FFM100 configuration with 1-phase sensors in differential mode (Bug #4214)

1.6.6.3 (2016-08-24)

Correct JUL string and ss unit in time display (Bug #3938)
Correct ALM100 configuration menu text (Bug #3986)

1.6.5.2 (2016-07-14)

Correction on unit conversion for generic sensor default data (Bug #3737)
Correct crash during color setup (Bug #3747)
Correct sunset/sunrise calculation data overflow (Bug #3920)
Fix Alert Test on Local display issue (Bug #3923)
Display “-” instead of 0V on DSM Bus Status screen which does not have ability to measure voltage. (Bug #3045)
Correct crash issue in SMS Test Dialog (Bug #3847)
Support heave display (Bug #3412)
Power off issue (Bug #3733)
Correct back light control level for DSM250 HW1
Fix issue for %q on DSM250 (Bug #3922)
Correctly display title for wind rose
Add support for DST110 hardware revision 2 (Bug #3815)

1.6.4.1 (2016-01-11)

Add ASCII/Unicode conversion on string data received from EMS100 in EMS100 configuration menu (Bug #3677)
Correct display number of static IP dialog in IPG100 configuration (Bug #3685)
Correct alert set/clear point settings display (Bug #3706)
Correct Battery Time Remaining Display for “Infinite” case (Bug #3711)

1.6.3.4 (2015-11-06)

Fix issue SSC Configuration incorrectly display NMEA0183 Sentence ID (Bug #3658)
Re-enable alert (Bug #3660)
Correct start time display for switch counter and timer (Bug #3663)

1.6.2.4 (2015-10-05)

Correct parameter calculation for both float and double which caused Anchor Watch invalid display issue (Bug #3609)

1.6.2.3 (2015-09-11)

Unicode version
Migrate from ARM Developer Suite v1.2 to GNUC/Eclipse
Support CLM100 Configurations
Support new DC PGN and Maretron Generic Sensor PGN
Corrected a problem where the display could reset during configuration of favorite screens in the “four quarters” format (Bug #3518)

1.5.3.5 (2015-03-09)

Enable support SSC300 (Bug #3380)
Enable New Magnetic Deviation Status Display for SSC300 (Bug #3381)
Correct VDR percent reading (Bug #3384)
Add pressure source for FPM configuration to match NMEA2000 v2.0 (Bug #3385)

1.5.3.3 (2014-10-06)

Correct device and alert instant conflict issue (bug #3234)
Change FFM K-factor divider calculation from 10/100/1000/10000 step to minimum error as used in N2KAnalyzer (Bug# 3383)
Support MBB200C configuration similar to TSMxxxC (Bug# 3382)
Support DSM150 HW 2.0 (Bug #3379)
Support SSC300 (Disabled) (Bug #3380)
New Magnetic Deviation Status Display for SSC300 (Disabled) (Bug #3381)

1.5.2.2 (2014-04-03)

Fix issue: DSM250 reboot on power button hold in control mode (bug #3007)
Fix issue: DSM250 unable to configure K-Factor on FFM100 (bug #2509)

1.5.1.3 (2014-03-27)

Use DSM device instance in place of alert source instance (bug #2734)
Correct Burnt bulb alerts not fully work (bug #2963)
Remove label setting in USB100 configuration menu
Add Engine and Transmission Warning Display and alert (bug #1107)
Improve DSM setting copying protocol (bug #2408, #2748, #2749)
Revise wording bug #1281, #1709, #2602, #2673, #2675, #2684
Add SMS device for display (bug #2789)
Fix TLA configuration screen bug (bug #2220)
Correct Dutch Translation issue (bug #1828)
Support special K-factor display on FFM100 SW 1.1.4.1 and above (bug #2509)
Remove gauge value on RAA configuration menu (bug #2701)
Bar graph size adjustment for SOC (bug #2585)
Automatically enable anchor watch alert when anchor watch position was set (bug #2747)
Allow one more digit to be change in Line Graph Manual Scale Settings (bug #2093)
Add SMS100 demo data for configuration (bug #2759)
Improve manual variation on SSC configuration screen (bug #2204)
Display dew point as DNA when humidity is DNA or 0% (bug #2791)
Add alert test function (bug #1340)
Line graph size adjustment (bug #2757)
Add “Numeric/Precision” type to most of display data type (bug #1414)
Add ability to reset Airmar devices to factory defaults (bug #2191)
Add SMS data alert
Add switch counter and timer alert
Correct EEPROM file location saving for DSM250 Emulator
Correct buffer size for remote device selection menu (bug #2662)

1.4.20.5 (2013-08-28)

Support J2K100 Engine Hours Request (bug #2665)
Support SMS100 configuration on SMS100 with NMEA2000 Class/Function to 70/171 (Bug #2669)
Correct Sunset & Sunrise times (Bug #2706)
Correct missing device in demo mode (Bug #2717)

1.4.19.3 (2013-07-02)

Support Switch Status Counter/Timer Display and Reset (bug #2541)
Search for available SMS, not lock only to the first SMS found (bug #2559)
Support 130316 (Temperature Extended Range) PGN (bug #2556)
Display “Infinite” for battery time remaining while charging or zero current (bug #2564)
Support Total kW Hours Reset ( bug #2573)
Change NMEA 2000 Database Version to 2.000 (bug #2613,2614)

1.4.18.8 (2013-06-05)

Support SMS100 Configuration
Alert with SMS feature
Add SMS Phone Book
DSM250 Configuration support SMS Phone Book copy (included in alert copy)
Disable 127501 in SMS100 configurations
Move Alert Indicator Button to the top layer in all operating mode (bug #2273)
Support Anchor Watch Control (bug #1730)
Support Trip Log Reset (bug #2534)
Support Trip Volume Reset (bug #2120)
Support Engine Trip Fuel Used Reset (bug #2120)

1.4.18.4 (2013-04-24)

Support SMS100 Configuration
Alert with SMS feature
Add SMS Phone Book
DSM150/250 Configuration support SMS Phone Book copy (included in alert copy)

1.4.17.5 (2013-04-01)

Support VDR100 Ethernet and password configurations.
Change VDR status timeout to 12s
Add “Incompatible USB Flash” to VDR status
Fix “Custom Title” bug #2445
Remove 127502 support

1.4.16.5 (2012-10-08)

Support demo output mode.
In order to switch to this mode, valid PIN must be entered.
PIN = 9999 – Last 4 digits of SN

Support DSM150 Configuration
Change Manufacturer ID 176 to Carling Technologies

1.4.15.3 (2012-07-30)

Support VDR100 Configuration
Support VDR100 Data
Support alert action on DCR in ALM mode
Correct temperature offset display (in Fahrenheit) on Airmar product configuration (Bug 2208)
Increase alert set delay limit to 1 hour
Increase alert clear delay limit to 1 hour
Increase alert re-trigger period limit to 12 hour

1.4.14.4 (2012-04-05)

Improved IPG100 DHS status
Support FFM100 SW 1.1.1 Configuration
Correct bug 1950 (Line graph error in some cases)
Support Maretron Fluid Flow and Trip Volume PGN
correct emulator power on/off issue

1.4.13.4 (2011-10-10)

Fix Vacuum Gauge color band reset on startup (bug 1800)
In software version number, use dot built instead of beta
Support DCR100 switch lock configuration
Support DCR100 power up state configuration
Support IPG100 cloud services configuration
Support New N2KServer Licenses Display
Support DHS status

1.4.12 (2011-07-27)

Add FFM100 Configuration Menu
Support 127497 (Trip Parameters, Engine) (bug 1584)
Add NBE100 Configuration Menu
Redraw menu after accept change in FPM100 tank capacity setting
Add Total Trip Fuel Used to Fuel Management Group (bug 1771)
Add Gauge and Line Graph for Fuel Rate, Fuel Economy and Fuel Consumption (bug 1773)
Add Alert Source Instance configuration to Alert Setup menu (bug 1498)
Fix window repeated window popup issue in DCM configuration menu (bug 1707)
Gauges will display decimal point depended on max-min range on the gauge

1.4.11 (2011-04-22)

Remove Alert Edit menu from all menu in Menu Lock Out Mode (bug 1671)
Fix enter button function in menu mode repeat issue (bug 1672)

1.4.10 (2011-04-19)

Add Current Sensor Zero Offset to DCR100 Configuration Menu (bug 1659)
Support Breaker Current PGN with the following display format: Numeric, Gauge, Line Graph (bug 1658,1657)
Add Burnt Out Bulb/Low Current When On Alert (bug 1656)
Add Favorite Control Mode which allow user to control switch/breaker (bug 1639,1655)
Change word “Course Up” to “Head Up” (bug 1596)
Add DCR100 in demo mode

1.4.9 (2011-03-03)

Add DCR100 Configuration Menu (bug 1555)
Add DST110 and Airmar Devices Configuration Menu (bug 1556)
Add feature for reversing the rudder angle display (bug 1468)
Limit minimum brightness to 1% instead of 0% (bug 1320)
Limit alert display to 11 alerts (bug 1506)
Remove 127258 (Heading variation) from eHeading device to fix an issue that DSM display GPS label in place of SSC label (bug 1382)
Add Menu Lockout feature (bug 1434)
Add Load default for Show Room Demo Mode when current brightness changed, current background color changed, key beep setting changed, Menu lockout mode enabled, unit changed

1.4.8 (2011-02-11)

Support DSM250 HW 3.0, 2.0 and 1.0
DSM250 HW 3.0: Support only LED back light
DSM250 HW 2.0: Support only FL back light

Support Optrex LCD with LED backlight
Add IPG100 Configuration Menu
Fix bug 1425 (Backlight can't be changed after switching from manual to auto)
Fix bug 1338 (Alert editor trigger times disappear)
Add feature in bug 1336 (Time Alert re-trig after power off/on)
Add feature in bug 1341 (Show GPS Label in Anchor Watch Alert)
Add feature in bug 1345 (Percent Load/Torque Display)
Add feature in bug 1171 (Programmable Indicator font size)
Change Wording in bug 1361
Change Wording in bug 1342
Change Wording in bug 1345
Support ACM100 with 2000:1CT selectable for each phase

1.4.7 (2010-10-29)

For manual favorite mode, display the last favorite screen when power up. (Favorite screen number will be saved to EEPROM whenever user push previous/next button while DSM is in manual favorite mode.) (bug 1362)
Remove menu “Remote Alerts: Enable/Disable” from alert advance setup menu (Remote alert always enabled) (bug 1321)
Always process remote alert no matter what is the current alert operating mode (bug 1321)
Add Dometic Proprietary PGN: 130828 and 130830 to n2k_db, allow them to be displayed in NMEA2000 PGN Enable/Disable menu (bug 1369)
Clear configuration data every time entering TLM configuration menu (bug1339). Remark: This bug must be fixed in TLM too.
Add FPM100 Configuration Menu
Increase maximum range of Re-trigger Period, Alert Set/Clear Delay in Alert Detail menu to 12 hours (instead of 15 minutes)
Add “beep test” Test-Mode command
Fix custom title issue
Support Data Damping control for J2K100 SW 1.0.11b1+
Support pressure display
Support humidity display

1.4.6 (2010-03-03)

Highlight the last shown Favorite Screen # when Entering Favorite Screen Setup (bug 1179)
Add Inclinometer Component (bug 1175)
Add line graph options menu with preview (bug 1250)
Add line graph support for most data (bug 1084)
Add favorite window layout preview (bug 1178)
Add word Charge/Discharge to the unit of Battery Current screen (Numeric and Gauge) (bug 1209)
Add NMEA0183 sentence ID setting menu (bug 1144)
Support SSC200 PGN rate of 25ms (bug 1131) (SSC200 firmware 2.0.11 and below did not support this)
Add new data formats (deg/s) for Rate of Turn (numeric and swing meter) (bug 1159)
Add new NMEA2000 Manufacturing Code based on NMEA document on 2009/11 (bug 998)
Replace needle of swing meter with gauge’s needle
Draw line between dot in line graph
Changes to J2K100 Configuration Menu, add support for AC/Icemaker Instance. Also, increase waiting time for SA list from 5s to 15s. (Remark: J2K100 SW 1.0.9 and above will support Dometic AC/Icemaker
Add new data display type “Total Fuel Consumption” and Engine Fuel Consumption” (inverse of Fuel Economy)
Remove Instance setting in favorite menu of the following data display type: Total Fuel Rate, Total Fuel Remaining, Time to Empty, Total Fuel Capacity, Total Fuel Level

(Remark: For Total Fuel Economy, Total Fuel Consumption and Distance to Empty, instance in the favorite menu will be indicated “GPS Instance”)

1.4.5 (2010-02-10)

Fix high traffic reboot issue (bug 657)
Increase delay time for expansion MCU communication
Add Temperature Line Graph
Add Humidity Line Graph
Add auto shutdown in power off stage (bug 1187)
Add UTC in GPS status screen (bug 1271)
For “Any” case, always switch to the device with the lowest instance (bug 1183)
Not clear graph and alarm memory if restart from application without boot
Remove "#" in "Favorite Screens Setup"/"Alert: yyyy #xxxx (dddd)

1.4.4 (2009-10-12)

Fix the bug caused by pushing power button while alert active and DSM is in initial screen (bug 1161)
Fix demo mode issue: DSM leave demo mode after automatic reset (bug 1164)
Fix demo mode issue: DSM did not automatic reset when alert parameter was changed (bug 1164)
Rework Favorite Screen Data Menus for AC Parameter (Bug 1167). Only menu is changed, configuration data structure still the same.
Add GPS Instance Field to Anchor Watch Alert (Bug 1172)
Change Line Graph Line to be Red (Bug 1176)
Add GPS200 demo for Anchor Watch Screen demo
Add more default favorite screen with custom title switch indicator
Add DSM250 File access for DSM250-PC/Emulator version.
Correct demo data for Barometric pressure
Support GPS200 configurations

1.4.3 (2009-08-18)

Correct Production Rate in Watermaker Screen (bug 1151)
GPS screen with color (bug 1148)
- Red border box around GPS PRN in status cross hairs. This border applies to satellites with numbers <31, > or = to 64. And the status bar in red also.
- Using the following color :
- 1. green = tracked and used satellite
- 2. blue = tracked but not used
- 3. yellow = available (no lock)o
- Except for night mode (red inverse)
- All color will be gray.
- Also support more than 12 satellites.
- Still display only first 12 highest priority
- 1. tracked and used - highest priority
- 2. tracked but not used
- 3. available
- We will always show SBAS (WAAS) satellite if it is in view.
- In case of SBAS has lower priority and cannot be located in our 12 slots, we will replace the last slot with this SBAS.

Remove Disabled Alert from alert status (bug 1147)
Add Numeric/Precision type to Heading and COG (bug 1139)
Ignore Switch Indicator Status PGN and remove color setting for Trip/Shed/Brown-out in Switch Indicator Display (bug 1149)
Increase font size for Switch Indicator Display (bug 1154)
Add choice of N/A for tank capacity in TLA configuration (bug 713)
Show “Unknown” for variation which come from heading PGN (bug 1036)
Add ability to program tank capacity to Data Not Available (“ – “) for TLA100, TLM100, TLM150, TLM200
Add ability to configure transmission periods for periodic PGN’s in EMS100 with F/W 1.4 or greater
Add ability to configure flywheel teeth to a resolution of 0.1 to support alternator tachometer signals for EMS100 with F/W 1.4 or greater
Add support for labeling for EMS100 with F/W 1.4 or greater

1.4.2 (2009-08-07)

Add Depth Line Graph
Change display resolution of GPS Lat/Lon in Alert setup to 3.3q (from 3.1q)
Change Annunciator periodic command period to 2.5 s (from 4s)
Add Anchor Watch Screen
Add Watermaker Screen
Add Anchor device in favorite menu
Add Special device in favorite menu
Add demo data for Watermaker
Fix issue about variation source in SSC200 configuration menu
Change menu item text for direction alert for Heading and COG and for time alert
Change size of all screens with dial to be the same size in quarter display.
Thicker line graph
Request for annunciator info. when receive annunciator PGN from new Annunciator
Add anchor alert (separated from outside radius alert)

1.4.1 (2009-06-01)

Support Alert
Enable DCM100 400A and 600A current sensor configuration
Add display type “Numeric/Precision” for Sea Temp
Add Hz in NMEA0183 Sentence/Rate Selection menu
Use double precision for latitude and longitude
Fix issue when there are more than 24 J1939 nodes.
Re-order Indicator Device (former Switch Bank) to be located after Heading Device
Fix issue with weather screen and line graph
Enable TLM150 configuration

1.3.11 (2009-04-28)

Support TLM200 configuration

1.3.10 (2009-03-20)

Sort all Device Configuration Menu Item alphabetically
Move Device Properties Menu into Display Setting Menu and change menu name to Advance Information
Sort all Display Setting Menu Item alphabetically
Add Device Label to SIM100 Configuration Menu (not the same as Channel Label)
Add Device Label to RIM100 Configuration Menu (not the same as Channel Label)
Add Device Label to TMP100 Configuration Menu (not the same as Channel Label)
Support Maretron Label Protocol #2
Support Maretron Channel Protocol #2
Support TLM100 Configuration
Tie favorite screen title (Label choice) to data
Correct elapsed time display (remove AM/PM)
Support variable rate of periodic TX PGN configuration for WSO100 and DCM100
Add menu item “Remove all offline devices” and “Restore Factory Defaults” to Device Selection menu
Support multiple data set line graph (such as multiple barometer)
Disable data request in device configuration while in demo mode
Add gauge display for Wind Speed
Correct EMS100 configuration issue
Add Label to GPS100 Configuration Menu
Add Label to J2K100 Configuration Menu
Add Label to SSC200 Configuration Menu
Add Label to EMS100 Configuration Menu
Add Primary Device Selection menu in Display Advance Config.

1.3.9 (2009-02-06)

Support TLM100 Configuration

1.3.8 (2008-12-11)

1.3.7 (2008-10-02)

J2K100 configuration support J1939 node address display
enable preview screen in color setup and gauge setup
correct truncated text in TLA calibration

1.3.6 (2008-09-26)

Enable demo mode - no load default
Change fuel management warning screen per Rich request

1.3.5 (2008-09-19)

Add warning screen mode
Add fuel management warning screen
Add frame building buffer in target platform
Add black edge line gauge
Default tank gauge has color
Allow only one button to be active to reduce lockup
Add green and red color to rudder gauge
Add more fuel management
Add support EEPROM cache and write buffer
Add switch status screen
Add text entering menu
Add switch status to favorite menu and device enable/disable
Add support display windows name
Enable SIM100 configuration
Enable RIM100 configuration
Disable switch bank favorite screen
Disable switch bank favorite menu and device enable/disable
Disable text entering menu
Disable display windows name

1.3.4 (2008-08-27)

Implemented Gauge Type 2 Configuration for TLA100
Implemented Dynamic Configuration menu depending on a specific Configuration parameter (example: Hide gauge resistances if no gauge is used) for TLA100

1.3.3 (2008-08-13)

Device Instance use all 8 bits in AC and no-swap upper/lower
Remove Device Instance/Priority from all dev configuration menu
Insert “Avg/Total“ for AC device in Favorite Screen Setup
Insert “Avg/Total“ for AC device in Data Enable/Disable
Remove “AC” from the title of AC device in Favorite Screen
Replace “Phase” with “Ph.” in the title of AC device in Favorite Screen
Allowed instance in Data Enable/Disable from 0 to 252

1.3.2 (2008-08-04) - Not Released

Enable ACM100 configuration
Change ACM device enable to 4(Gen)+4(Util)+4(Bus) AC devices
Add SIM100, RIM100 and TMP100 configuration
Disable SIM100, RIM100 and TMP100 configuration
Correct alarm issue

1.3.1 (2008-05-28)

Add ACM100 and DCM100 configuration
Add AC screen
Add 5(Gen)+5(Util)+4(Bus) AC devices
Change device index maximum to 200 instead of 64
Reduce manual device name from 32 bytes to 1 byte (don’t use it)
new EEPROM definition
Support DCM100 configuration
Support screen display for DC and battery (16 devices max.)
Support screen display for AC Power (4x3 devices max.)
Support AC Power Enable/Disable sub menu
Disable ACM100 configuration
Gauge configure value does not change after changing unit

1.2.2 (2008-03-10)

No request for Product Info when start up
Longer waiting time when searching for the device on the network

1.2.1 (2008-03-04)

Fix problem when device try to transmit PGN while the device has no node address which cause n2k stack full
support device > 50 nodes on the bus
dev_sel 256 record instead of 50
Add DCM100 configuration menu
new EEPROM definition
EEPROM fail execute gen ldf after reset
fix the conflict between TLA and KHA configuration

1.1.1 (2008-01-10)

Support both DSM250 HW1.0 and DSM250 HW 2.0
Support exp_pwm_adc 1.0.1
exp_pwm_adc : store current pwm settings in EEPROM and load when restart
exp_pwm_adc : add command pwm cfg backup
Support basic B&W mode
Support NEC, Kyocera and Kyocera B&W LCD
Replace periodic reset EXP with 2 bytes checking for HW 2.0
Shutdown after release button for 50ms
Add more exp testmode command
Add delay before 3-beep startup
Support STW_cal copy
support boot version inquiry
support firmware info data structure
support EEPROM data structure
beta version with supporting DCM100 prototype configurations
WSO100 configuration update live data
fix bug when pop back from color setting menu
SSC200 configuration retry after start deviation but still idle

1.1.0 (2007-11-15)

New configurable gauges and half gauges
Use red needle for most gauges
Use N2K View Data Categories as default for gauges
Add alarm copy
Add display settings copy
Add all settings copy
Correct favorite copy including device enable/disable and device index
Add more anti aliased drawing functions
All menu can update data without restarting
Correct request rate for 129285 to 1 Hz maximum
Support EMS100 configurations
Support DSM250 HW 2.0
Support DSM250 B&W (basic)
Support Kyocera LCD
Bug 775 fixed
Read Model/HW version from PCB
Fixed problem with scrolling device configuration menus data fields being updated in wrong screen locations
Fixed TLA100_KH configurations
beta version with supporting DSM250 HW 2.0
beta version with supporting Kyocera LCD
beta version with supporting DSM250 B&W
replace shell with testmode
correct fav setup menu bug 775
gauge settings follow Rich's request
limit major divisions to 4 and 5 only
limit minor divisions from 1 to 5 only

1.0.8 (2007-10-05)

Correct problem with KHA100 calibration

1.0.7 (2007-09-28)

gen ldf in most of maretron product configuration menu
correct problem for ios in SSC200 with old SW
add close hauled screen
re-enable m/s unit for speed (boat and wind)
remove decimal point in all numerical heading screen
all wind direction display 0-180 with Starboard/Port instead of 0-360
correct bug in most of all device configurations
add more N2K manufacturer code
change conversion ratio of engine fuel pressure to match NMEA2000 v1.2 (NMEA2000 v1.0 use DF47 (100Pa resolution) while v1.2 use DF29 (1000Pa))

1.0.6 (2007-05-18)

Use fixed 12 MHz Main Clock instead of automatic calculation

1..0.5 (2007-05-11)

Support both crystal and external oscillator

1.0.4 (2007-05-04)

No power supply turn-off, only backlight turned off when shutdown

1.0.3 (2007-05-02)

Add Keel Configurations
Fix Line Graph DB
Add CAN TX Watchdog
Fix Start-up routine for jump –ap

1.0.2 (2007-04-03)

Received only the PGNs which are used

1.0.1 (2007-04-01)

Initial Public Release

More information

Request Data Sheets

Knowledge Base

Suggested Systems

Support & Downloads

Warranty

Tools

Remote Support

Need help?

Company

Maretron

Catalogs