* SIM100 requires configuration if two or more DCR100s, RIM100s, or SIM100s exist on single network (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure)
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000® network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, engine room air temperature, refrigerator/freezer temperature, under bolt temperature (inverters, charges, pumps, motors, etc.), tank temperatures (live well bait, hot water, etc.), and air duct temperatures. The optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a comprehensive fuel management system.
Best of all, the TMP100 is NMEA 2000® certified so you can view any and all temperature information anywhere on the vessel using a compatible NMEA 2000® display. The TMP100 is a key component of Maretron's N2KView® vessel monitoring and control system.
The following accessories are available for the TMP100:
 | Ambient air temperature probe Part Number: TP-AAP-1 Temperature range : -20°C to 80°C or -4°F to 176°F |
 | Immersion temperature probe Part Number: TP-IP-1 Temperature range : -20°C to 80°C or -4°F to 176°F |
 | Exhaust gas temperature probe Part Number: TP-EGT-1 Temperature range : 0°C to 900°C or 32° to 1652°F |
 | Ring temperature probe Part Number: TR3K Temperature range : -20°C to 80°C or -4°F to 176°F |
Note: Maretron monitoring sensors are updated using Maretron’s N2KAnalyzer application on a PC paired with an approved NMEA 2000® gateway.
