- Suggested Systems
- ACM100 - Alternating Current Monitor
- DCM100 - Direct Current Monitor
- FFM100 - Fluid Flow Monitor
- FPM100 - Fluid Pressure Monitor
- GPS200 - Antenna/Receiver
- J2K100 - J1939 to NMEA 2000 Gateway
- NBE100 - Network Bus Extender
- RAA100 - Rudder Angle Adapter
- SSC300 - Solid State Compass
- SMS100 - Text Messaging
USB100 NMEA 2000® / USB gateway
Maretron's USB100 is a gateway for bridging computers to an NMEA network. This allows you to use PC based vessel monitoring and control software like Maretron's N2KView® or PC based navigation software. The gateway provides one simple connection between the network and the PC, which eliminates conventional multiplexers and the maze of wires usually associated with interfacing equipment to PCs.
Maretron supplies drivers for the following versions of Windows.
- Windows XP (32-bit and 64-bit)
- Windows Vista (32-bit and 64-bit)
- Windows 7 (32-bit and 64-bit)
- Windows 8 (32-bit and 64-bit)
- Windows 10 (32-bit and 64-bit)
- Windows 11 (64-bit)
Note: The supplied drivers do not work on PCs with the ARM Architecture, such as certain models of the Surface Tablets.
For older PC-based navigation software that requires receiving data in NMEA 0183 format, the USB100 automatically converts information from the NMEA 2000® network to NMEA 0183 sentences. You can continue benefiting from navigational and charting software that you already own while enjoying the many benefits of networked NMEA 2000® instruments.
Maretron's USB100 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance.
- Bearing Orig. to Dest. (BOD)
- Bearing to Waypoint (BTW)
- Distance to Waypoint (DTW)
- Velocity Made Good (VMG)
- Est. Time of Arrival (ETA)
- Time to Go (TTG)
- Cross Track Error (XTE)
- Set / Drift
- PC-based charting software
- PC-based diagnostic tools
This section contains the Windows device driver for the Maretron USB100.
- USB100 Windows Drivers and Support Software (Windows 7/8/10, 32/64-bit) (Version v22.214.171.1241-03-15.setup, 4.8 MB, updated March 19, 2021)
This digitally signed driver for the Maretron USB100 NMEA 2000®/USB gateway is compatible with Windows 7/8/10 32-bit and 64-bit.
It is also included with N2KAnalyzer and N2KView.
- USB100 Windows Drivers and Support Software (Windows XP/Vista, 32/64-bit) (Version Driver.126.96.36.199, 440.8 KB, updated August 28, 2017)
This release has a digitally signed driver for the Maretron USB100 NMEA 2000®/USB gateway that is compatible with Windows XP (Service Pack 3 and later) 32-bit and 64-bit, Windows Vista 32-bit and 64-bit.
This driver is no longer supported and is only provided for legacy support.