Maretron’s DSM410 is a 4.1” high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display capabilities, the DSM410 features an alert/alarm package and electrical switching capability.
Unlike traditional single-display units, DSM410 users can choose numeric, gauge, bar or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.
The DSM410 will directly connect with any NMEA 2000® network and with the exception of AIS data will display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable.
The DSM410 displays a multitude of information including AC power, anchor status, battery, depth, electrical distribution, engine, environment, fuel management, GPS, heading, navigation, pressure/vacuum, rudder, speed, status indicators, tanks, temperature, time, transmission, water makers, weather, wind and more.
The DSM410 includes a comprehensive, flexible alert capability. Configure audio and visual alerts on virtually any data that the DSM410 is capable of monitoring. Available alert types include:
- High alert
- Low alert
- Data unavailable alert
- On alert
- Off alert
- Circuit breaker tripped alert
- Course alert
- GPS quality alert
- Outside radius alert
- Inside radius alert
- Direction alert
- Timer alert
The DSM410 is capable of sharing alert information with other DSM410 units as well as any DSM570 and N2KView® installations on the network. An alert defined on any device can be acknowledged on any other device on the network. Following is a screenshot of a shallow water alert:
Once the alert appears, you simply press the "Enter" key twice to see the Alert Status screen, shown here:
Maretron's DSM410 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance.
Examples of data that the DSM410 can display are:
- AC power (Average Frequency, Voltage and Current, Phase-Neutral Frequency, Voltage and Current, Phase-Phase Frequency, Voltage and Current
- Anchor Watch
- Battery / DC (Voltage, Current, Battery Temperature, Battery State of Charge, Battery Time Remaining, Ripple Voltage, Power)
- Depth (Water Depth, Depth below Transducer)
- Electrical (Resistance)
- Electrical Distribution (Switch/Breaker, Breaker Current, On/Off/Error Counters, On/Off/Error Timers)
- Engine Monitor (Boost Pressure, Hours, Coolant Pressure, Coolant Temperature, Exhaust Gas Temperature, Fuel Pressure, Fuel Rate, Oil Pressure, Oil Temperature, Tachometer, Tilt/Trim, Voltage, Fuel Ecomony, Fuel Consumption, Percent Load, Percent Torque, Trip Fuel Used, Warning Indicators)
- Environment (Barometer, Heat Index, Humidty, Temoperatures, Wind Chill)
- Fluid Flow (Flow Rate, Trip Volume)
- Fuel management (Distance to Empty, Time to Empty, Total Fuel Capacity, Total Fuel Level, Total Fuel Consumption, Total Trip Fuel Used, Total Fuel Economy, Total Fuel Renmaining)
- GPS (COG, Lat/Lon, SOG, Satellites, Time, Accuracy)
- Heading (Heading, Rate of Turn, Variation)
- Humidity (Inside, Outside, User Defined
- Indicators (Status, , On/Off/Error Counters, On/Off/Error Timers)
- Mechanical (dB, Force, Strain)
- Motion (Acceleration, Angle, Angular Velocity, Angular Acceleration, Distance, Rotation Rate, Velocity)
- Navigation (BOD, BTW, COG, XTE, DTW, ETA, Lat/Long, Rolling Road, Set/Drift, SOG, TTG, VWG, Waypoint Number and Name)
- Pressure / Vacuum
- Rudder
- SMS (Status, Signal Strength)
- Speed (Through Water, Over Ground, Total Log, Trip Log)
- Tanks (Capacity, Level, Remaining)
- Time (Local, UTC, Moon Phase, Sunrise, Sunset, Twilight)
- Transmission (Gear, Oil Pressure, Oil Temperature, Warning Indicators)
- Vessel (Heave, Pitch, Roll, Trim Tabs, Keel)
- Watermaker (Sea Recovery Status display)
- Wind (Apparent direction and speed, True direction and speed, Groud direction and speed)
The following accessories are available for the DSM410:
 | DSM410 Protective Cover Part Number: DSM410-Dust-Cover |
A PC based simulator for the DSM410 may be downloaded by clicking the following link.
The following screenshots are examples of what the DSM410 can display.
Not all background and color schemes are shown, you can change the background colors for every screen to be white, black, red, green, or blue.
Alternator Temperature Gauge
Anchor Light and Bilge Currents
Apparent Wind Rose
Apparent Wind Rose Close Hauled
Apparent Wind Speed Graph
Atmospheric Pressure Graph Black
Atmospheric Pressure Graph White
Barometric Pressure Digital
Battery Current Gauge
Battery Parameters
Battery State Of Charge Gauge
Battery Temperature Gauge
Battery Voltage Gauge
COG Course Up Rose
Depth Digital
Depth Graph
Engine Battery Voltage Gauge
Engine Coolant and Oil Gauges
Engine Economy and Trip Gauges
Engine Fuel Rate Digital
Engine Hours Digital
Engine Pressure and Load Gauges
Engine Tachometer Gauge
Exhause Gas Temperature Gauge
Fresh Water Levels
Fuel Economy and Temperature
Fuel Economy Digital
Fuel Economy Gauge
Fuel Economy Graph
Fuel Gauges
Fuel Level Gauge
Fuel Rate Digital
Fuel Remaining Digital
Fuel Total Gauge
Generator Battery Voltage Gauge
Generator Coolant and Oil Gauges
Generator Current Gauge
Generator Frequency Gauge
Generator Fuel Rate Digital
Generator Hours Digital
Generator Pressure and Load Gauges
Generator Tachometer Gauge
Generator Voltage Gauge
GPS Status
Gray and Black Water Levels
Ground Wind Direction Digital
Ground Wind Direction Rose
Heading Cardinal
Heading Head Up Rose
Heading North Up Rose
Inclinometer
Latitude and Longitude
Lights All Off
Lights All On
Lights Some On
Local Time and Date
Moon Phase
Outside and Inside Temperatures Digital
Outside Temperature and Heat Index
Outside Temperature and Humidity
Outside Temperature Digital
Outside Wind Chill and Temperature
Pitch and Roll
Rate of Turn Gauge
Refrigerator Temperature Gauge
Rudder Angle Digital
Rudder Angle Gauge
Run Counter and Timer
Run Indicators Off
Run Indicators One On
Sea Temperature Digital
Shore Power Current Gauge
Shore Power Frequency Gauge
Shore Power Parameters
Shore Power Voltage Gauge
Shore Total Power Used
SOG and COG Digital
Speed Over Ground Gauge
Speed Over Ground Gauge Blue Color Background
Speed Over Ground Gauge Inverse Blue Color Background
Speed Over Ground Gauge Inverse Color Background
Speed Over Ground Gauge Inverse Green Color Background
Speed Over Ground Gauge Inverse Red Color Background
Speed Over Ground Gauge Red Color Background
STW Digital
STW Gauge
Sunrise and Sunset
Supply and Return Fuel Temperatures
Switch Indicators All Off
Switch Indicators All Off Color
Switch Indicators Some On
Switch Indicators Some On Color
Time and Distance To Empty
Trip and Total Log
Trip Fuel Used
True Wind Rose
True Wind Speed Digital
True Wind Speed Gauge
UTC Time and Date
Variation
Note: Maretron monitoring sensors are updated using Maretron’s N2KAnalyzer application on a PC paired with an approved NMEA 2000® gateway.
1.10.4.2 (2026-05-05) – Current Release
- Add support for CLM100 v1.3.1+ (with CLM100 Alert and X-Switch)
- Fix the issue which causes the DSM to reboot when changing screen window format
- Fix the issue which causes the DSM to lost instance in alert settings
- Fix the issue which causes the DSM to lost instance and source settings abilities after executing ACM100 device alert configuration.
1.10.3.1 (2026-03-27) -Not Released
- Fix the issue which cause the DSM to reboot when changing screen window format
1.10.2.1 (2025-07-25)
- Add support for DCR100 v1.2.3+ (with Inverse Switch Status/Control Mode) (Bug #DSM410SW-5)
- Add support for ACM100 v1.1.2+ (with 127503 and 127504 support)
- Add support for NMEA standard alert
- Add support for ACM100 v1.1.3+ (with ACM100 Alert and X-Switch)
- DSM alert must be saved before leaving alert setup menu
- Support IPG100 configuration with DHS password requirement
1.10.1.4 (2025-04-14) - Not Released
- Add support for DCR100 v1.2.3+ (with Inverse Switch Status/Control Mode) (Bug #DSM410SW-5)
- Add support for ACM100 v1.1.2+ (with 127503 and 127504 support)
- Add support for NMEA standard alert
- Add support for ACM100 v1.1.3+ (with ACM100 Alert and X-Switch)
- DSM alert must be saved before leaving alert setup menu
1.9.2.2 (2025-01-14) - Not Released
- Add support for DCR100 v1.2.3+ (with Inverse Switch Status/Control Mode) (Bug #DSM410SW-5)
- Add support for ACM100 v1.1.2+ (with 127503 and 127504 support)
1.9.1.2 (2024-05-08)
- Add support for DSM410v2 (HW 3.0)
- Add SPN selection to J2K100 configuration
- Add support for SMS200 configurations
1.8.8.4 (2023-06-30)
- Add new fluid types string based on NMEA AT20220802, Bug# DSM570SW-4
- Add keypad lock mode, Bug# DSM570SW-5
- Add keypad sensitivity setting, Bug# DSM570SW-5
- Allow the maximum of two simultaneous keys pressed. If multiple touches were detected, key press action will be skipped to reduce effect of water stream, Bug# DSM570SW-5
- Add configuration support for Airmar DST810, Bug# DSM570SW-1
- Change beep time base to 20ms
- Enable beep sound only on active buttons
1.8.7.1 (2022-09-08)
- Fix Yellow & Red markers on Alert Screen (Bug# DSM570SW-2)
- Fix alert labels bunched together (Bug# DSM570SW-3)
1.8.6.3 (2022-03-04)
- Fix rolling road trail issue on VGA resolution display
- Correct Demo icon position on VGA resolution display
- Change screen lock mode selection from buttons combination on power up to power down options selection.
- Add testmode command “startup” to support startup options
- For DSM emulator, fix border random flashing, support keyboard on windows
- Fix rolling road crash when ellipse cannot be drawn.
- Correct DCM menu display text GEL
1.8.5.2 (2021-10-07) - Not Released
- In power off state, keep internal power supply active if N2K supply voltage is less than 10V
1.8.4.6 (2021-04-21)
- Support Yaw from 127257
- Support Generic Sensor Device
- Support Standard N2K Label PGN: 130060 (Bug #)
- Support Shaft Seal Temperature (15) for DD291 (Bug #4702)
- Fix annunciator stop working after alert deleting issue (Bug #4652)
- Add units for force (Bug #3749)
1.8.4.2 (2020-12-01) - Not Released
1.8.3.2 (2020-08-14)
- Support TSM810C, TSM1210C, MBB300C configuration
- For FFM100 configuration menu, always display K-Factor as 1000 when the K-Factor on FFM100 is 1000. This fix an issue caused after load default to FFM100 and the DSM display the old K-Factor value before loading default, this issue also fixed in the FFM100 SW 1.4.1.1
- Support CLM100 SW 1.2+
- Support CLM100 configuration for Battery, Engine, Transmission, and Vessel Devices
1.8.1.2 (2018-10-15)
- Disable true power OFF feature
- Support Hardware version check
1.7.5.3 (2018-01-08)
- Same as DSM250 SW 1.7.5.3
- Support DSM startup mode (Bug #4363)
1.7.4.2 (2017-08-09)
- All new CAN driver on OS
- Firmware and Boot support both new CAN driver and the old driver
- Fix CAN TX stop working issue
- Fix CAN RX bandwidth issue
- Improve CAN Bus recovery
- Improve firmware programming speed on N2K bus from 33% to 85% bandwidth
- Fix issue on 1.7.4.1 which not allow normal operation when no keypad detected. This is required for PCBSetup the DSM410 bare board without keypad connected.
1.7.3.1 (2017-07-25)
- Update Fluid Type List (Bug #4260, #4261)
- Re-enable restore factory defaults menu to IPG100 configurations (Bug #4268)
- Fix CAN bandwidth issue by removing usleep in main loop
- Add CAN re-init routine
1.7.2.1 (2017-05-02)
- Initial Public Release
- SW Version number matched DSM250
