This intermediate monitoring system will monitor important parameters on your sailboat, displaying vessel heading, position, depth, speed, battery, shore power, temperatures, bilge pumps, doors and fire alarms on three sunlight readable displays. Even when you are off the boat, you can still receive status and alert text messages on your phone.
The following table shows the products included within this example system plus a list of the information or data available for display.
| Product | Description | Available Data List |
| DSM410 | Port Helm Pod Display | Displays data in this list, monitors the data and sounds an internal or external buzzer if there is a problem and sends a text message out via the SMS100 |
| DSM410 | Stbd Helm Pod Display | Displays data in this list, monitors the data and sounds an internal or external buzzer if there is a problem and sends a text message out via the SMS100 |
| DSM250 | Nav Station display | Displays data in this list, monitors the data and sounds an internal or external buzzer if there is a problem and sends a text message out via the SMS100. |
| SMS100 | Texting module | Sends text messages to one or more phone numbers when any monitored data in this list goes outside programmed limits |
| SSC300 | Compass | Monitors magnetic heading, rate of turn and pitch and roll |
| GPS200 | Cabin top GPS | Position, speed over ground, course over ground, time, date, magnetic variation and more |
| DST110 | Depth/Speed/Water Temp | Measures water depth, speed through water, sea temperature, trip log and cumulative log |
| SIM100 | Switch indicator | 3 high bilge water indicators, magnetic door switch, smoke/heat detector, CO detector |
| ALM100 | Alarm buzzer | Sounds a loud buzzer when any monitored data in this list goes outside programmed limit |
| DCM100 | Battery monitor | Monitors battery voltage, current, temperature, state of charge and time remaining |
| ACM100 | Shore power monitor | Monitors voltage, current, frequency and power |
| TMP100 | Temperature monitor | Monitors cabin temperature, engine room temperature, alternator temperature, refrigerator temperature |
| RIM100 | Run indicator | Monitors pump breaker status, pump run status, counts and times pump runs |
This file requires Maretrons free NMEA 2000® network design tool N2KBuilder® to be installed on your PC.
The following screenshots are examples of Text Messages you can receive when monitoring these values.
Boat Moving Alarm
Door Open Alarm
High Bilge Water Alarm
Low Battery Alarm
Low Cabin Temperature
Shore Power Fail
Smoke Alarm
Status response
The following screenshots are examples of how monitored data can be displayed on the DSM410 / DSM250.
Alternator Temp Gauge
Battery Current
Battery Parameters
Battery State Of Charge
Battery Temperature
Battery Voltage
COG Course Up Rose
Depth Digital
Depth Graph
EGT Gauge
GPS Status
Heading Cardinal
Heading Head Up
Heading North Up
Inclinometer
Lat Lon
Local Time and Date
Moon
Pitch Roll
Rate of Turn
Refrigerator Temperature Gauge
Run Counter and Timer
Run Indicators Off
Run Indicators On
Sea Temp Digital
Shore Power Current
Shore Power Frequency
Shore Power Parameters
Shore Power Voltage
Shore Total Power Used
SOG and COG
SOG Gauge
STW Digital
STW Gauge
Sunrise and Sunset
Switch Indicators Off
Switch Indicators Off Color
Switch Indicators On
Switch Indicators On Color
Total Trip Log
UTC Time and Date
Variation
