- Products
- Suggested Systems
Suggested Systems
- ACM100 - Alternating Current Monitor
- DCM100 - Direct Current Monitor
- FFM100 - Fluid Flow Monitor
- FPM100 - Fluid Pressure Monitor
- GPS200 - Antenna/Receiver
- J2K100 - J1939 to NMEA 2000 Gateway
- NBE100 - Network Bus Extender
- RAA100 - Rudder Angle Adapter
- SSC300 - Solid State Compass
- SMS100 - Text Messaging
- Support
Support & Downloads
Need help?
- Company
Security Monitoring – Intermediate System
Overview
This intermediate system provides security information including three motion detectors and three door/hatch switches. The display (DSM250) monitors the switch indicator (SIM100) and whenever motion is detected or a door/hatch is opened then the display shows a red indicator, and the alarm buzzer (ALM100) is sounded to notify everyone onboard and to scare off intruders. If the power to the motion detectors is turned off or if the wires to the motion detectors or door switches are compromised, then the display shows a yellow indicator to let you know that there is a problem and a particular sensor isn’t working. The color scheme is configurable so you can pick a scheme that works best for you. The display can also signal the texting module (SMS100) to send out one or more text messages as a notification that someone is on the boat. A text message can also be sent if the GPS antenna (GPS200) indicates that the boat’s position has changed indicating theft or a broken mooring line.
The following table shows the products included within this example system plus a list of the information or data available for display.
Product | Description | Available Data List |
DSM250 | Helm Pod Display | 5.7” displays shows data in this list, monitors the data and sounds an internal buzzer if there is a problem |
SIM100 | Switch Indicator Module | Monitors switch closures like motion and magnetic door sensors |
GPS200 | Cabin top GPS | Position, Speed Over Ground, Course Over Ground, Time, Date, Magnetic Variation, More |
ALM100 | Alarm Buzzer | Sounds a loud buzzer when any monitored data in this list goes outside programmed limit |
SMS100 | Texting Module | Sends text messages to one or more phone numbers when any monitored data in this list goes outside programmed limits |
Downloads
This file requires Maretron’s free NMEA 2000® network design tool N2KBuilder® to be installed on your PC.
DSM250 Screenshots
The following screenshots are examples of how the security components will be displayed on the DSM250.
All Security Points Armed (Black) and Ready
All Security Points Armed (Green) and Ready
All Security Points Armed (White) and Ready
COGCourseUpRose
GPSStatus
LatLon
Lazarette Door Wires Cut or Disconnected
Moon
Pilot House Door Open
Pilot House Door Wires Cut or Disconnected
Salon Door Open
Salon Door Wires Cut or Disconnected
Salon Motion Detected
SOGCOG
SOGGauge
SunriseSunset
TimeDateLocal
TimeDateUTC
Variation
Text message screenshots
The following screenshots (click to enlarge) are examples of Text Messages you can receive when security alerts are generated.
Boat Moving Alarm
Door Open Alarm
Alerts
- Salon Motion Detector
- Salon Door Opened
- Salon Motion Detector Problem (No Power or Wires cut)
- Salon Door Sensor Problem (No Power or Disconnected)
- Pilot House Motion Detector
- Pilot House Door Opened
- Pilot House Motion Detector Problem (No Power or Wires Cut)
- Pilot House Door Sensor Problem (Wires Cut or Disconnected)
- Lazarette Motion Detector
- Lazarette Door Opened
- Lazarette Motion Detector Problem (No Power or Wires Cut)
- Lazarette Door Sensor Problem (Wires Cut or Disconnected)
- Vessel Moved or Adrift