This indoor temperature and humidity intermediate monitoring system provides information about a cabin’s environmental conditions (Cabin Temperature and Relative Humidity). The display shows the information using several different formats including numeric, gauges, or graphs. The display also monitors the temperature and humidity and if user programmable high or low thresholds are surpassed, an alert is triggered and the display provides a visual and audible indication. The display can also send a signal to the 110dB buzzer.
The following table shows the products included within this example system plus a list of the information or data available for display.
| Product | Description | Available Data List |
| DSM410 | Display | Displays data in this list, monitors the data and sounds an internal buzzer if there is a problem |
| ALM100 | Alarm Buzzer | Sounds a loud buzzer when any monitored data in this list goes outside programmed limit |
| CLM100 | Current loop monitor | When connected together with Maretron’s Indoor Humidity/Temperature Sensor (part number IRHT-01), the CLM100 monitors relative humidity and temperature |
This file requires Maretron’s free NMEA 2000® network design tool N2KBuilder® to be installed on your PC.
The following screenshots are examples of how monitored data can be displayed on the DSM410.
Inside Humidity Digital
Inside Humidity Digital Black
Inside Humidity Graph
Inside Humidity Graph Black
Inside Temperature and Humidity Digital
Inside Temperature and Humidity Digital Black
Inside Temperature and Humidity Graphs
Inside Temperature Digital
Inside Temperature Digital Black
Inside Temperature Gauge
Inside Temperature Gauge Black
Inside Temperature Graph
Inside Temperature Graph Black
