Maretron announces the release of version 5.1.12 of the N2KView® NMEA 2000® Network Display Software. The program is available from (https://www.maretron.com) under the Updates tab of the device that you are updating. The full build... Read More
TSM800(Discontinued)
Yes! You are able to receive an email message in response to an alert status from a device running N2KView. * This requires the transmitting device (Computer, MBB or TSM) to have internet access and an active email account in order to transmit the... Read More
N2KView is designed to display data from IP cameras produced by AXIS Communications, with the exception of the "Companion Series", that provide: Video Stream Motion jpg (mjpg) video format VAPIX interface Anonymous Login Viewing Enabled- If you want... Read More
Saving a N2KView config file to a USB device. 1. Insert a USB flash drive into an available USB port on your device. 2. From the main screen, tap to reveal the available tabs and select Commands and Settings on the right. 3. Select tab labeled... Read More
DCR100 channels have two possible operating modes: “Normal”, in which the DCR100 channel responds to standard NMEA 2000 switching commands, and “Annunciator”, in which the channel may be connected to a power source for a... Read More
If you have set the camera configuration and video still does not appear, please do the following: Confirm the PC or Maretron Display is connected to the LAN network a camera is installed. Run the Axis Camera Setup tool and confirm that the... Read More
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder. To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability... Read More
Maretron Model Device Description NMEA2000 Operating Voltage Engine/Battery Interface CLM100 P/N: M000070 Current Loop Monitor 9 to 32 Volts SSC200 P/N: M000001, M000021, M000022 NMEA 2000 Solid State Compass HW 1.0 9 to 16 Volts ... Read More
The SMS100 Status Message is a text message you can receive from the SMS100 containing key pieces of information regarding your vessel. When the SMS100 is installed, you can text the word "Status" to your SMS100 cellular number ... Read More
The ALM100 can be commanded to annunciate by way of Maretron Displays(excluding legacy DSM200) or PC software N2KView(alerts enabled) only. Third-Party devices, Chart-plotters, and MFDs are not compatible to with the ALM100. Read More
Results
1 -
10 of
16