SSC200Yes, many of Maretron device's data can be displayed on Raymarine Chart-plotters With Seatalk and Seatalk ng functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet... Read More
... Read More
Occasionally, a device can be in "boot mode" (represented in N2KAnalyzer by an orange highlight of the device's entry in the device list). This can happen due to a software update which fails due to network problems. A Maretron device that is ... Read More
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder. To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability... Read More
Maretron Model Device Description NMEA2000 Operating Voltage Engine/Battery Interface CLM100 P/N: M000070 Current Loop Monitor 9 to 32 Volts SSC200 P/N: M000001, M000021, M000022 NMEA 2000 Solid State Compass HW 1.0 9 to 16 Volts ... Read More
A standard Maretron NMEA2000 navigation sensor network consists of the following components: Compass: SSC200 GPS: GPS200 Depth Speed Water: DST110 Weather: WSO100 Display: DSM150 System Capabilities: Wind Apparent Speed over ground Course... Read More
You reset the SSC200 to transmit the factory default messages using Maretron's DSM150 or DSM250 display in the following way: Enter menu mode, scroll to "Configuration:" and press Scroll to "Device Configuration:" and press Scroll to the row... Read More
Yes, it is possible to turn on and off the SSC200 transmitted messages (or PGNs) using Maretron's DSM150, DSM200, or DSM250 display. On the display: Enter menu mode, scroll to "Configuration:" and press Scroll to "Device Configuration?" and press... Read More
Yes, you can change how often the SSC200 transmits messages over the NMEA 0183 network. There are two ways to change the rate at which NMEA 0183 sentences are transmitted: 1) using Maretron's DSM150, DSM200, or DSM250 display, or 2) sending the... Read More
You reset the SSC200 to transmit the factory default NMEA 0183 messages using Maretron's DSM150, DSM200, or DSM250 display in the following way: Enter menu mode, scroll to "Configuration:" and press Scroll to "Device Configuration:" and press... Read More
