Knowledge Base

Articles: Search Results

  1. If I use the J2K100 with my Onan generator that has a power rating between 4-32kW, what data can I expect to see on the NMEA 2000 network? The J2K100 provides the following information when hooked to an Onan generator with a power rating of 4-32KW:Generator Average Line-Neutral AC RMS VoltageGenerator Average AC RMS FrequencyEngine Coolant TemperatureEngine Oil PressureBattery Voltage... Read More
  2. If I use the J2K100 with my Onan generator that has a power rating between 40-99kW, what data can I expect to see on the NMEA 2000 network? The J2K100 provides the following information when hooked to an Onan generator with a power rating of 40-99 kW:Generator Average Line-Neutral AC RMS VoltageGenerator Average AC RMS FrequencyEngine Coolant TemperatureEngine Oil PressureBattery Voltage... Read More
  3. What is the purpose of the Switch Indicator Module (SIM100)? The SIM100's purpose is to deliver switch status over an NMEA 2000 network. Because of this feature, the use of common end of line components is available. The most common of such components are normally closed switches, such as magnetic door, w... Read More
  4. What are the latest changes that have been made to N2KView on Maretron’s Legacy Devices? Maretron announces the release of version 5.1.12 of the N2KView® NMEA 2000® Network Display Software. The program is available from (https://www.maretron.com) under the Updates tab of the device that you are updating. The full build number of the ver... Read More
  5. How do I monitor the bilge with Maretron equipment? Before we discuss how to monitor the bilge with Maretron equipment, let's take a look at a typical bilge pump and alarm wiring diagram (see Figure 1). Notice that there are two ways to turn the bilge pump on. First, there is the float switch -- ... Read More
  6. The Micro/Mid Powertap tee has five wires; how should I connect them to my 12V DC? The Micro/Mid Powertap has five individual wires on the opposite end of the tee connector.Connect the white and brown wire conductors to a 4 to 6 amp in-line fuse or breaker in order to independently protect each side of the NMEA2000(R) network. Conn... Read More
  7. What software changes have taken place with N2KAnalyzer? Maretron announces the release of the new N2KAnalyzer® V3 software.Windows user are able to download the latest version of N2KAnalyzer V3 via the following link to pair with their Maretron NMEA2000 gateway, USB100 or IPG100.https://www.maretron.com/p... Read More
  8. How do I perform a quick setup of a TLA100? Quick setup guide for a TLA100. The following article was written assuming you (reader) are familiar with Maretron configuration tools and products. This article is intended for advanced users and NMEA certified Technicians who require quick referenc... Read More
  9. Does Maretron offer quick setup instructions for the FFM100 in a dual diesel engine application? The prerequisite for using this guide requires the use of a Windows PC and Maretron's N2KAnalyzer program installed. The hardware required for Maretron device configuration is the USB100 or IPG100 Gateway connected to a powered N2K network with ... Read More
  10. How do I configure a channel on the SIM100 using Maretron’s DSM250 Display?   You configure a channel on the SIM100 in the following way. Enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and press enter. Scroll to the row containing SIM100 and press enter. Select instance pr... Read More
Displaying 11 to 20 out of 44 records First Page Previous Page Page of 5 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.