Knowledge Base

Articles: Search Results

  1. When I try to run N2KAnalyzer, I receive an error message asking for XMLLITE.DLL. XMLLITE.dll is a file used in performance XML based applications. If the file has been damaged or removed from your system, it can be reinstalled in the following way: download and install XMLLITE.dll  using the following link  http://www.microsoft.c... Read More
  2. Why is the WSO100 wind direction incorrectly displayed on my display? The WSO100 will not show the correct wind direction if it hasn't been aligned with the boat. You align the WSO100 in one of two ways:align the post (there are three posts attaching the top of the WSO100 to the base) closest to the humidity senso... Read More
  3. Why doesn’t the WSO100 atmospheric pressure agree with my locally reported barometric pressure? The WSO100 measures atmospheric pressure, which isn't adjusted for elevation like the locally reported barometric pressure. If you use the WSO100 at sea level, then the atmospheric pressure and barometric pressure should agree, however if you us... Read More
  4. I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Operating Mode:"; what is this? The TLA100 can operate in one of two ways:without an analog gauge which is referred to as the "NMEA 2000" modewith an analog gauge which is referred to as the "NMEA 2000 & Analog Gauge" modeThe default mode of operation is without an analog gauge... Read More
  5. What firmware changes have taken place on the Maretron CLM100 Current Loop Monitor? You can update your device using the N2KAnalyzer tool. 1.1.1.1(2016-08-29):Corrected a problem where PGN 130840 sometimes appeared in the Transmitted PGN List even though it is not being transmitted (3727)Manufacturing improvements (3973) 1.0.5.1 (20... Read More
  6. What configuration options are available for the TMP100? Use the N2KAnalyzer software program or a Maretron DSM150, or Maretron DSM250 to perform Maretron Device level configuration. This article will show methods for configuring the TMP100 Using Maretron's N2KAnalyzer software tool.  Pre-requisits:PC... Read More
  7. What configuration options are available for the FPM100? You can use the N2KAnalyzer software program or a Maretron DSM150, or Maretron DSM250 to perform the configuration. This article will show methods for configuring the FPM100 Using Maretron's N2KAnalyzer software tool. Pre-requisits:PC with N2KAn... Read More
  8. What configuration options are available for the DCM100? Use the N2KAnalyzer software program or a Maretron DSM150, or Maretron DSM250 to perform Maretron Device level configuration. This article will show methods for configuring the DCM100 Using Maretron's N2KAnalyzer software tool. Pre-requisits:PC ... Read More
  9. How do I connect the Dometic Q-logic controller to the J2K100 for N2KView control? First, you will need to purchase or connect the Q-logic J1939 board or confirm you have one already working on board your vessel. Figure 1 illustrates what the Q-logic J1939 interface should look like.Once you can confirm the J1939 interface is conne... Read More
  10. Can Maretron’s sensor data be displayed on a Furuno CANBUS network? Yes, much of Maretron device's data can be shown on Furuno displays with “CANBUS” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the transmi... Read More
Displaying 11 to 20 out of 64 records First Page Previous Page Page of 7 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.