Knowledge Base

Articles: Search Results

  1. How do I perform a TLM100 quick setup for a square tank using the N2KAnalyzer program? Quick setup guide for a TLM100. The following article was written assuming you(reader) are familiar with Maretron configuration tools and products. This article is intended for advanced users and NMEA certified Technicians who require quick reference... Read More
  2. What accessories can I order for the TLM100 and which one should I use? The following accessories are available for the TLM100.TA-5H-1.25BSP   1.25" BSP Displacement Hull Tank Adapter TA-5H-1.5NPT    1.5" NPT Displacement Hull Tank AdapterA focus tube(TFT) can help technicians control the ultrasonic signal path generated... Read More
  3. What are the basic configurable parameters for the TLM100 and how do I configure them using a DSM250? What are the basic configuration items of the TLM100 and how do I perform them using a DSM250? The TLM100 comes from the factory pre--configured for a 40 inch depth, rectangular fuel tank. By default, the TLM100 is configured to transmit information ... Read More
  4. I have installed the TLM100 and see incorrect tank levels; what does this mean?  The TLM100 uses an ultrasonic signal to determine a distance measurement from sensor to level.The tank application must be compatible with the TLMXXX measurement technology. If you have already installed a TLMXXX and received unexpected results, the... Read More
  5. How do I save and load a configuration file for a TLM100, TLM150, or TLM200 using N2KAnalyzer? N2KAnalyzer has a feature that allows for the user to load a saved configuration table onto a TLM100,TLM150, or TLM200 on the NMEA 2000 network. To load a configuration file, use the following process:Start the N2KAnalyzer program.Select a gateway to... Read More
  6. What happens when I use the TLM100/150 without a focus tube? A focus tube is recommended for tank applications that experience a drastic level change when the vessel is underway.The TLM100 transmits an ultrasonic pulse that allows the device to calculate the distance from the sensor to the fluid surface (simil... Read More
  7. I see the TLM100 and TLM150 have an SAE 5-hole mounting pattern; where can I find a template? The TLM100 hole pattern for mounting the sensor to a fluid tank  is a common SAE J1810 5-Hole Pattern.Use the attached article file: "5 Hole FT mount Maretron.pdf" as a reference.Note: Print PDF at 115% scale for a usable TLM100 and TLM150 pattern. ... Read More
  8. How do I display the TLA100, TLM100, TLM150, or TLM200 tank capacity on Maretron’s DSM150, DSM200, or DSM250 display? You display the TLA100 tank capacity on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view the tank capacity and press <... Read More
  9. Are the aluminum TLM100 accessories (i.e., adapters, focus tubes, etc.) compatible with my stainless steel tanks? Although dissimilar metals in contact with each other are subject to corrosion in the marine environment, several corrosion inhibitors are available. Tef-Gel, Duralac, & Lanacote are a few (please check the label for your particular application).... Read More
  10. What firmware changes have taken place on the Maretron TLM100? (2016-08-29):Correct fluid source transmitted in Channel PGN (3959)Corrected a problem where the device could lose its instance information after a power cycle (3964,3965, 3966, 3967) support for real-time display of ... Read More
Displaying 1 to 10 out of 67 records First Page Previous Page Page of 7 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.