Knowledge Base

Articles: Search Results

  1. How do I calibrate the SSC200 to account for magnetic deviation? The SSC200 can be calibrated to account for magnetic deviation in several ways; please refer to the SSC200 User's Manual for instructions. It is always best to calibrate the rate of turn gyro before you perform magnetic deviation calibration on ... Read More
  2. I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Zero Offset Calibration..."; what is this? Maretron's DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Zero Offset Calibration...", which is used to calibrate the rate of turn gyro found within the SSC200. Rate gyros tend to drift over temperat... Read More
  3. How do I display the SSC200 rate of turn on Maretron’s DSM150, DSM200, or DSM250 display? You display the SSC200 rate of turn on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view rate of turn and press < Enter... Read More
  4. Why does the SSC200 rate of turn indicate that I am turning when I am not turning? The SSC200 rate of turn may indicate that the vessel is turning when the vessel is not turning. You correct this situation by calibrating the rate of turn gyro within the SSC200 using either a DSM200 or a DSM250. To calibrate the rate of turn using o... Read More
  5. How do I calibrate the SSC200 rate of turn using Maretron’s DSM150, DSM200, or DSM250 display? You calibrate the SSC200 rate of turn using a DSM150, DSM200, or DSM250. To calibrate the rate of turn using one of the displays:Enter menu mode, scroll to "Configuration..." and press < Enter >Scroll to "Device Configuration..." and press < Enter >S... Read More
  6. I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Damping Period:"; what is this? Maretron's DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Damping Period:", which is used to smooth the rate of turn indication. The rate of turn indication uses the rate of turn gyro found within th... Read More
  7. Is it possible to change the rate at which the SSC200 transmits NMEA 0183 sentences? Yes, you can change how often the SSC200 transmits messages over the NMEA 0183 network. There are two ways to change the rate at which NMEA 0183 sentences are transmitted: 1) using Maretron's DSM150, DSM200, or DSM250 display, or 2) sending the ... Read More
  8. What is the baud rate of the SSC200 NMEA 0183 port? The default baud rate of the SSC200 NMEA 0183 port is 4800 baud. This can be changed to 38,400 baud if desired.... Read More
  9. Is it possible to change the baud rate of the SSC200 NMEA 0183 port? Yes, the baud rate can be changed from the default rate of 4800 baud to 38,400 baud. Please refer to the user's manual for changing the baud rate.... Read More
  10. What is the maximum rate at which the SSC200 will transmit heading from the NMEA 0183 port? By default, the SSC200 transmits heading from the NMEA 0183 interface ten times per second. This can be changed to 40 times per second in one of two ways: 1) using Maretron's DSM150, DSM200, or DSM250 display (please see the respective display&#... Read More
Displaying 1 to 10 out of 53 records First Page Previous Page Page of 6 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.