Knowledge Base

Articles: Search Results

  1. How do I calibrate the SSC200 roll to read zero using Maretron’s DSM150, DSM200, or DSM250 display? You can calibrate the SSC200 roll to read zero when the vessel is sitting flat in the water using a DSM150, DSM200, or DSM250 display. To zero the roll:Enter menu mode, scroll to "Configuration..." and press < Enter >Scroll to "Device Configuration..... Read More
  2. Why does the SSC200 roll angle not read zero when the vessel is flat in the water? You can calibrate the SSC200 roll angle to read zero when the vessel is sitting flat in the water using a DSM150, DSM200, or DSM250 display. To zero the roll:Enter menu mode, scroll to "Configuration..." and press < Enter >Scroll to "Device Configura... Read More
  3. How do I display the SSC200 roll angle on Maretron’s DSM150, DSM200, or DSM250 display? You display the SSC200 roll angle on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view roll and press < Enter >Scroll t... Read More
  4. How do I connect the Dometic Q-logic controller to the J2K100 for N2KView control? First, you will need to purchase or connect the Q-logic J1939 board or confirm you have one already working on board your vessel. Figure 1 illustrates what the Q-logic J1939 interface should look like.Once you can confirm the J1939 interface is conne... Read More
  5. Testing a 4-20mA Transducer Testing a 4-20mA Transducer both Maretron and 3rd party.Please keep in mind of all safety procedures while performing any troubleshooting. Testing transducer while still connected to NMEA2000® via Maretron FPM100 or CLM100Components requiredPC runnin... Read More
  6. What are the latest changes to Maretron’s N2KView? Maretron announces the release of version 6.0.12 of the N2KView® NMEA 2000® Network Display Software. The PC version of N2KView 6.0.12 is available is available from http://www.maretron.com/support/downloads.php#n2kview, under the “Software Updates” ... Read More
  7. What firmware changes have taken place on the Maretron SSC300? What firmware changes have taken place on the SSC300? 1.0.6.1(2016-8)Corrected a problem where "SSC300" was not recognized in configuration commands sent over the NMEA 0183 interface (3707)1.0.5(2016-4)Manufacturing improvement1.0.4.1(2015-10)Correct... Read More
  8. My cellular provider is requesting the SMS100 IMEI number. What is a IMEI number? Where can I find this number on my SMS100? What is a device's IMEI number?"Every mobile phone, GSM modem or device with a built-in phone / modem has a unique 15 digit IMEI number. Based on this number, you can check some information about the device, e.g., the brand or model or the devic... Read More
  9. What is the procedure for testing the ALM100 Annunciator? The procedure for testing an ALM100 can be performed using the following Maretron User Interface products:DSM150/DSM250:Go to Main Menu-->Scroll to Configuration-->Select "Device Configuration"-->Select the ALM00 you wish to test-->Scroll to "Test An... Read More
  10. Does Maretron offer quick setup instructions for the FFM100 in a single diesel engine application? The prerequisite for using this guide requires the use of a Windows PC and Maretron's N2KAnalyzer program installed. The hardware required for Maretron device configuration is the USB100 or IPG100 Gateway connected to a powered N2K network with ... Read More
Displaying 1 to 10 out of 174 records First Page Previous Page Page of 18 Next Page Last Page

Icon Search Advanced Search
Show
That Contains
But Not
In
Search for
Search in
Sort by
Also search in Attachments
 
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.
 
Copyright© 2019 Carling Technologies. All rights reserved. Visit Carling Technologies, a partner company.