Knowledge Base

Articles: Search Results

  1. What size hole is required to be cut through the hull for the DST100? The DST100 can be mounted through the hull using either a plastic or bronze housing. The plastic and bronze housings require a 2" hole (51mm).... Read More
  2. Are there other mounting options for the DST100 besides the standard plastic through hull housing? Yes, Maretron offers an optional through hull housing in bronze. The Maretron part number for the bronze housing is M33-100. The plastic and bronze housings use the same size hole in the hull (2 inches or 51mm).... Read More
  3. Are there other mounting options for the DST110 besides the standard plastic through hull housing? Yes, Maretron offers an optional through hull housing in bronze. The Maretron part number for the housing is M33-100. The plastic and bronze housings use the same size hole in the hull (2 inches or 51mm).... Read More
  4. What size hole is required to be cut through the hull for the DST110? The DST110 can be mounted through the hull using either a plastic or bronze housing. The plastic and bronze housing require a 2" hole (51mm) .... Read More
  5. What accessories can I order for the TLM100 and which one should I use? The following accessories are available for the TLM100.TA-5H-1.25BSP   1.25" BSP Displacement Hull Tank Adapter TA-5H-1.5NPT    1.5" NPT Displacement Hull Tank AdapterA focus tube(TFT) can help technicians control the ultrasonic signal path generated... Read More
  6. Does Maretron offer quick setup instructions for the FFM100 in a dual diesel engine application? The prerequisite for using this guide requires the use of a Windows PC and Maretron's N2KAnalyzer program installed. The hardware required for Maretron device configuration is the USB100 or IPG100 Gateway connected to a powered N2K network with ... Read More
  7. Does Maretron offer quick setup instructions for the FFM100 in a single diesel engine application? The prerequisite for using this guide requires the use of a Windows PC and Maretron's N2KAnalyzer program installed. The hardware required for Maretron device configuration is the USB100 or IPG100 Gateway connected to a powered N2K network with ... Read More
  8. What is a DST100? A DST100 is a product that is mounted through the hull below the water line of a vessel and is used to measure water depth, speed through water, sea water temperature, depth transducer offset, resettable trip log, cumulative log. All of this informat... Read More
  9. What is "dead rise angle"? In the context of the DST100, dead rise angel is the angel between the bottom surface of the DST100 and the horizon. A flat bottom boat has a dead rise angle of 0°, whereas a deep V-hull might cause the DST100 to exit the vessel at an angle. The DST1... Read More
  10. How do I measure dead rise angle? There are several ways to measure the dead rise angle but perhaps the easiest way is to use a digital level; simply lay the level against the hull and read the angle.... Read More
Displaying 1 to 10 out of 11 records First Page Previous Page Page of 2 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.