Knowledge Base

Articles: Search Results

  1. What is "dead rise angle"? In the context of the DST100, dead rise angel is the angel between the bottom surface of the DST100 and the horizon. A flat bottom boat has a dead rise angle of 0°, whereas a deep V-hull might cause the DST100 to exit the vessel at an angle. The DST1... Read More
  2. What is the maximum dead rise angle that the DST100 can cope with? The DST100 can accurately measure depth up to a dead rise angle of 23°.... Read More
  3. How do I measure dead rise angle? There are several ways to measure the dead rise angle but perhaps the easiest way is to use a digital level; simply lay the level against the hull and read the angle.... Read More
  4. What accessories can I order for the TLM100 and which one should I use? The following accessories are available for the TLM100.TA-5H-1.25BSP   1.25" BSP Displacement Hull Tank Adapter TA-5H-1.5NPT    1.5" NPT Displacement Hull Tank AdapterA focus tube(TFT) can help technicians control the ultrasonic signal path generated... Read More
  5. Why does the SSC200 roll angle not read zero when the vessel is flat in the water? You can calibrate the SSC200 roll angle to read zero when the vessel is sitting flat in the water using a DSM150, DSM200, or DSM250 display. To zero the roll:Enter menu mode, scroll to "Configuration..." and press < Enter >Scroll to "Device Configura... Read More
  6. How do I calibrate the SSC200 roll to read zero using Maretron’s DSM150, DSM200, or DSM250 display? You can calibrate the SSC200 roll to read zero when the vessel is sitting flat in the water using a DSM150, DSM200, or DSM250 display. To zero the roll:Enter menu mode, scroll to "Configuration..." and press < Enter >Scroll to "Device Configuration..... Read More
  7. Why does the SSC200 pitch not read zero when the vessel is flat in the water? You can calibrate the SSC200 pitch to read zero when the vessel is sitting flat in the water using a DSM150, DSM200, or DSM250 display. To zero the pitch:Enter menu mode, scroll to "Configuration..." and press < Enter >Scroll to "Device Configuration... Read More
  8. How do I calibrate the SSC200 pitch to read zero using Maretron’s DSM150, DSM200, or DSM250 display? You can calibrate the SSC200 pitch to read zero when the vessel is sitting flat in the water using a DSM150, DSM200, or DSM250 display. To zero the pitch, enter menu mode, scroll to "Configuration..." and press enter. Scroll to "Device Configuration.... Read More
  9. How do I operate the DSM250 backlights?     The second buttonfrom the left is the back-light button. While in favorite screen mode, do aquick press of the back-light button to step through one of three back-lightintensities. We say a quick press since a long press of the bac... Read More
  10. What are the basic configurable parameters for the TLM100 and how do I configure them using a DSM250? What are the basic configuration items of the TLM100 and how do I perform them using a DSM250? The TLM100 comes from the factory pre--configured for a 40 inch depth, rectangular fuel tank. By default, the TLM100 is configured to transmit information ... Read More
Displaying 1 to 10 out of 12 records First Page Previous Page Page of 2 Next Page Last Page

Icon Search Advanced Search
Show
That Contains
But Not
In
Search for
Search in
Sort by
Also search in Attachments
 
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.
 
Copyright© 2019 Carling Technologies. All rights reserved. Visit Carling Technologies, a partner company.