Knowledge Base

Articles: Search Results

  1. What information is available from the J1939 to NMEA 2000 Bridge (J2K100) and can be viewed on Maretron’s displays?  The J2K100 is capable of transmitting the following information:PGN 65030AC Generator CurrentAC Generator FrequencyAC Generator VoltageEngine parameters 127488, 127489TachometerEngine HoursCoolant PressureCoolant Water TemperatureEngine Oil Pressure... Read More
  2. How can I tell if an engine or engine network requires a Maretron Gateway such as the J2K100 or a Network Bridge? Generally, marine engine CAN bus networks have one of two popular types of protocols:J1939NMEA 2000Most outboards offered since about 2006 support NMEA 2000 natively. Maretron always recommends first contacting the engine manufacturer to determine wh... Read More
  3. What is a J2K100? The J2K100 is a gateway or bridge between a J1939 network and an NMEA 2000 network. The J2K100 receives messages (or PGNs) from a J1939 network and converts the messages into NMEA 2000 messages (or PGNs). In some cases, J1939 messages are the same as... Read More
  4. What are the latest changes that have been made to N2KView on Maretron’s Legacy Devices? Maretron announces the release of version 5.1.12 of the N2KView® NMEA 2000® Network Display Software. The program is available from (https://www.maretron.com) under the Updates tab of the device that you are updating. The full build number of the ver... Read More
  5. What marine engines are found to have J1939 capability? Following is a table showing engines and their J1939 capability.  Engine manufacturer  Controller Module J1939 Capable standard?Must Be Ordered With J1939 Capabilities. Caterpillar   ADEM III and A4/C4.4, C6.6, C9, C15, C18, C32   "Acerts series" Yes... Read More
  6. What is the serial port Pinout of CAN1 and CAN 2 located on the MBB200C? The MBB200C has two separate CAN connections used for connecting to a NMEA2000 network. Use single NMEA2000 connection for a single vessels NMEA2000 network or both connections if you have installed two indapendant NMEA2000 networks you want to displ... Read More
  7. What are the basic configurable parameters for a J2K100 and how do I configure them using a DSM250? What are the basicconfiguration items of a J2K100 and how do I perform them using a DSM250? The J2K100 is a bridgebetween two different digital networks. One side of the bridge is connected toa J1939 network and the other side of the bridge is c... Read More
  8. What are the latest changes to Maretron’s N2KView? Maretron announces the release of version 6.0.10 of the N2KView® NMEA 2000® Network Display Software. The PC version of N2KView 6.0.10 is available is available from (http://www.maretron.com/downloads), under the “Software Updates” category.The TSM80... Read More
  9. How do I determine whether the J2K100 is compatible with my Caterpillar engines? Most Caterpillar engines may have J1939 on production years 1996 and beyond. A person who installs a J2K100 must do a visual assessment of the existing J1939 engine connections or contact a Caterpillar representative for guidence.  Here are some easy... Read More
  10. Are there any NBE100 network diagram examples? Two NBE100 network diagram examples are shown in this article. Please note that both diagrams show just one NBE100 allowing the normal NMEA 2000 network restrictions (50 nodes or products, 200m trunk line, 78m of drop length) to be doubled. It is pos... Read More
Displaying 1 to 10 out of 11 records First Page Previous Page Page of 2 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.