Knowledge Base

Articles: Search Results

  1. I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "J1939 Source Address:"; what is this? Maretron's DSM150,  DSM200, and DSM250 displays have a J2K100 configuration setting called "J1939 Source Address:", which is used to program the J2K100 to accept only messages from a certain J1939 device. For example, there might be several devi... Read More
  2. How do I set the J2K100 configuration setting called "J1939 Source Address:" using Maretron’s DSM150 or DSM250 display? You set the J2K100 configuration setting called "J1939 Source Address:" using Maretron's DSM150, DSM200, or DSM250 display in the following way. Enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and press ... Read More
  3. How do I set up my SMS100 address book using Maretron displays? SMS100 Operational Requirements: Working NMEA2000 networkSMS100 text moduleDSM150/DSM250 display with firmware version 1.4.18.8 or higher N2KView software/hardware versions 3.6.2 or higherThe SMS100 requires a Maretron display to produce alert messag... Read More
  4. How do I make a custom NMEA 2000 cordset cable? Does Maretron offer a field attachable connector? Maretron offers several accessories that allow you to make a custom NMEA 2000 cable.It may be necessary to make a custom cable for the following reasons:Cable runs longer than 10m in lengthRouting raw cables micro/mid through bulkheads, wire trays, a... Read More
  5. How do I connect a Maretron Field Makable Connector or Field Attachable to an NMEA2000 Cable? The heart of the NMEA2000 system is the cabling infrastructure and it is vital that field connections are made correct to avoid damage to sensors or non-intelligent components such as tees, multi-ports, power-taps. Maretron offers four types of Field... Read More
  6. Should I use double-ended cordsets or should I build my own cables using bulk cable and field-attachable connectors? If possible, you should consider using overmolded double-ended cordsets since they are less expensive and they tend to be more reliable than cables made using bulk cable and field-attachable connectors. Unfortunately, overmolded double-ended cordsets... Read More
  7. Can I change the direction the elbow points for a 90 degree field attachable connector? Yes, you can change the direction the elbow points for a 90 degree field attachable connector. When you assemble the field attachable connector, you can adjust the direction in which the elbow points by rotating the insert into one of the four availa... Read More
  8. How do I upload a config to an IPG100 for mobile devices and real time cloud? This article will guide you through the steps of uploading your N2KView configuration from your computer (MAC or PC) to the Maretron IPG100 for mobile devices and real time cloud service.While running the N2KView application on your computer and on t... Read More
  9. What firmware changes have taken place on the Maretron SSC200? What firmware changes have taken place on the Maretron SSC200 Compass? Update your device today using the N2KAnalyzer software tool.SSC200 Firmware Versions5.0.4.1(2013-07)Correct Gyro Offset Table Issue (2463)Increase the acceptable error range of G... Read More
  10. What are the latest changes to Maretron’s N2KView? Maretron announces the release of version 6.4 of the N2KView® V3 software.The Computer (PC & MAC) version of N2KView is available via the following link https://www.maretron.com/products/N2KView.php?tab=9The TSM800C, TSM810C, TSM1330C and MBB300C... Read More
Displaying 1 to 10 out of 55 records First Page Previous Page Page of 6 Next Page Last Page

Icon Search Advanced Search
Show
That Contains
But Not
In
Search for
Search in
Sort by
Also search in Attachments
 
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.
 
Copyright© 2019 Carling Technologies. All rights reserved. Visit Carling Technologies, a partner company.