Knowledge Base

Articles: Search Results

  1. How do I display the GPS100 UTC date on Maretron’s DSM150, DSM200, or DSM250 display? You display the GPS100 UTC date information on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view the UTC date and press... Read More
  2. How do I display UTC from the GPS100 on Maretron’s DSM150, DSM200, or DSM250 display? You display UTC from the GPS100 on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode (press the key or far right button), scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to vie... Read More
  3. Can the J2K100 convert Volvo-Penta engine data to NMEA2000? Yes, a J2K100 can be used to convert a Volvo Penta standard J1939 messages to NMEA2000.  Prior to a purchase of a J2K100(Per engine) examine the existing cabling provided by the engine manufacturer. Engines with EVC, EDC systems can be connected to t... Read More
  4. How do I connect a Maretron Field Makable Connector or Field Attachable to an NMEA2000 Cable? The heart of the NMEA2000 system is the cabling infrastructure and it is vital that field connections are made correct to avoid damage to sensors or non-intelligent components such as tees, multi-ports, power-taps. Maretron offers four types of Field... Read More
  5. Is the the J2K100 compaible with Crusader engines? The J2K100 can connect to a Crusader diagnostic CANBUS port for J1939 operations. Crusader offers service manuals for several supported engines. Maretron suggests consulting with your engine technician or contacting crusader direct for suggested inte... Read More
  6. How do I perform a TLM100 quick setup for a square tank using the N2KAnalyzer program? Quick setup guide for a TLM100. The following article was written assuming you(reader) are familiar with Maretron configuration tools and products. This article is intended for advanced users and NMEA certified Technicians who require quick reference... Read More
  7. I see N2KView offers a component for "Indicator Status"; what products can I use to show Indicator Status? An Indicator Status component uses the NMEA 2000 message called "Binary Switch Bank Status" to show three condition states:OnOffErrorA RIM100, SIM100, and DCR100 all transmit the necessary message for the N2KView component to work.You can create seve... Read More
  8. My cellular provider is requesting the SMS100 IMEI number. What is a IMEI number? Where can I find this number on my SMS100? What is a device's IMEI number?"Every mobile phone, GSM modem or device with a built-in phone / modem has a unique 15 digit IMEI number. Based on this number, you can check some information about the device, e.g., the brand or model or the devic... Read More
  9. What is the procedure for testing the ALM100 Annunciator? The procedure for testing an ALM100 can be performed using the following Maretron User Interface products:DSM150/DSM250:Go to Main Menu-->Scroll to Configuration-->Select "Device Configuration"-->Select the ALM00 you wish to test-->Scroll to "Test An... Read More
  10. I see that the ALM100 has a fixed tone output of 105 Decibels. With the dampener accesory closed what is the decibel rating? The ALM100 has a low decibel of 97dB when the sound dampener is completely closed. The dampener can be adjusted to support a tone range of 97dB to 105dB.... Read More
Displaying 1 to 10 out of 19 records First Page Previous Page Page of 2 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.