Knowledge Base

Articles: Search Results

  1. Which NMEA 0183 sentences does the SSC200 transmit? The SSC200 transmits the following NMEA 0183 sentences or messages:HDG - Heading, Deviation & VariationHDM - Heading, MagneticHDT - Heading, TrueROT - Rate of TurnMAROUT - Maretron Proprietary Output Sentence... Read More
  2. Is it possible to turn on or off SSC200 NMEA 0183 transmitted sentences? Yes, it is possible to turn on and off the SSC200 transmitted NMEA 0183 sentences or messages using Maretron's DSM150, DSM200, or DSM250 display. On the display:Enter menu mode, scroll to "Configuration:" and press < Enter >Scroll to "Device Con... Read More
  3. How do I reset the SSC200 to send the factory default NMEA 0183 sentences? You reset the SSC200 to transmit the factory default NMEA 0183 messages using Maretron's DSM150, DSM200, or DSM250 display in the following way:Enter menu mode, scroll to "Configuration:" and press < Enter >Scroll to "Device Configuration:" and ... Read More
  4. Is it possible to change the rate at which the SSC200 transmits NMEA 0183 sentences? Yes, you can change how often the SSC200 transmits messages over the NMEA 0183 network. There are two ways to change the rate at which NMEA 0183 sentences are transmitted: 1) using Maretron's DSM150, DSM200, or DSM250 display, or 2) sending the ... Read More
  5. What is the baud rate of the SSC200 NMEA 0183 port? The default baud rate of the SSC200 NMEA 0183 port is 4800 baud. This can be changed to 38,400 baud if desired.... Read More
  6. I see the SSC200 uses the NMEA 0183 identifier II (i.e., the two letters following the $ of an NMEA 0183 sentence); is it possible to change the identifier to some other value? Yes, it is possible to change the identifier that the SSC200 transmits as part of NMEA 0183 sentences. Please refer to the user's manual for instructions on how to make this change.... Read More
  7. What is the maximum rate at which the SSC200 will transmit heading from the NMEA 0183 port? By default, the SSC200 transmits heading from the NMEA 0183 interface ten times per second. This can be changed to 40 times per second in one of two ways: 1) using Maretron's DSM150, DSM200, or DSM250 display (please see the respective display&#... Read More
  8. Does the USB100 convert NMEA 2000 engine PGNs to NMEA 0183 sentences? Yes, the USB100 converts some of the NMEA 2000 engine PGN information into NMEA 0183 sentences. Please refer to the document entitled “USB100 Engine Sentences.pdf”, which can be found below in the Attachments section.... Read More
  9. Which NMEA 0183 sentences does the SSC200 receive? The SSC200 receives the following NMEA0183 sentences or messages:RMC - Recommended Minimum Specific GNSS DataVTG - Course Over Ground and Ground SpeedPMAREXE - Maretron Proprietary Execute SentencePMARSETPX - Maretron Proprietary Set Period Sentence... Read More
  10. Is it possible to change the baud rate of the SSC200 NMEA 0183 port? Yes, the baud rate can be changed from the default rate of 4800 baud to 38,400 baud. Please refer to the user's manual for changing the baud rate.... Read More
Displaying 1 to 10 out of 168 records First Page Previous Page Page of 17 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.