Knowledge Base

Articles: Search Results

  1. Why is the GPS100 Course Over Ground (COG) erratic at low speeds? The GPS100 computes Course Over Ground (COG) by observing prior fixes or positions and extrapolating the direction of travel from those fixes. If the vessel is not moving, then the GPS100 can not extrapolate the direction of travel and the readings b... Read More
  2. How do I display the GPS Course Over Ground (COG) using Maretron’s DSM150 or DSM250 display? You display the GPS100 Course Over Ground (COG) information on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view the CO... Read More
  3. How do I connect a Maretron Field Makable Connector or Field Attachable to an NMEA2000 Cable? The heart of the NMEA2000 system is the cabling infrastructure and it is vital that field connections are made correct to avoid damage to sensors or non-intelligent components such as tees, multi-ports, power-taps. Maretron offers four types of Field... Read More
  4. What firmware changes have taken place on the Maretron SSC300? What firmware changes have taken place on the SSC300? 1.0.6.1(2016-8)Corrected a problem where "SSC300" was not recognized in configuration commands sent over the NMEA 0183 interface (3707)1.0.5(2016-4)Manufacturing improvement1.0.4.1(2015-10)Correct... Read More
  5. How do I perform a TLM100 quick setup for a square tank using the N2KAnalyzer program? Quick setup guide for a TLM100. The following article was written assuming you(reader) are familiar with Maretron configuration tools and products. This article is intended for advanced users and NMEA certified Technicians who require quick reference... Read More
  6. I see N2KView offers a component for "Indicator Status"; what products can I use to show Indicator Status? An Indicator Status component uses the NMEA 2000 message called "Binary Switch Bank Status" to show three condition states:OnOffErrorA RIM100, SIM100, and DCR100 all transmit the necessary message for the N2KView component to work.You can create seve... Read More
  7. My cellular provider is requesting the SMS100 IMEI number. What is a IMEI number? Where can I find this number on my SMS100? What is a device's IMEI number?"Every mobile phone, GSM modem or device with a built-in phone / modem has a unique 15 digit IMEI number. Based on this number, you can check some information about the device, e.g., the brand or model or the devic... Read More
  8. What is the procedure for testing the ALM100 Annunciator? The procedure for testing an ALM100 can be performed using the following Maretron User Interface products:DSM150/DSM250:Go to Main Menu-->Scroll to Configuration-->Select "Device Configuration"-->Select the ALM00 you wish to test-->Scroll to "Test An... Read More
  9. I see that the ALM100 has a fixed tone output of 105 Decibels. With the dampener accesory closed what is the decibel rating? The ALM100 has a low decibel of 97dB when the sound dampener is completely closed. The dampener can be adjusted to support a tone range of 97dB to 105dB.... Read More
  10. Does N2KAnalyzer offer a software tool to perform quick fluid level calibrations for all of Maretron’s tank monitoring products? Yes, N2Kanalyzer offers two types of tank calibrations: Manual Table and Step Fill. Both configuration features can be used to calibrate the correct tank volume for your Maretron tank monitoring product.Used in in conjunction with any of Maretron... Read More
Displaying 1 to 10 out of 23 records First Page Previous Page Page of 3 Next Page Last Page
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.