How to add N2KView to Windows Startup


This procedure is applicable for Windows® 7, 8, 8.1 and 10.

 

To open the “Startup” folder the easy way, just hit Windows+R to open the “Run” box, type “shell:startup,”
and then press Enter.

 

 

This will open a File Explorer window right to the “Startup” folder.

 

 

Right-click the desktop shortcut of Maretron N2KView and select copy.

 

Navigate back to the startup folder, right-click and select paste.

 

You have successfully added the Maretron N2KView to the startup procedure of this PC!

 

Close the Startup folder, start the Maretron N2KView application and accept the disclaimer.

 

Tap on the screen to view tabs and select Commands & Settings on right-hand side of display.

 

Select settings tab labeled Configuration

 

Select configuration tab labeled General

 

Enable checkbox for Bypass Initial Power On Disclaimer and Fuel Management Warning Popup Windows

 

Accept the Warning Disclaimer by selecting OK

 

Select Save at bottom of window

 

Select Close to exit settings window

 

N2KView will now boot on PC startup and load to main screen.

 



Article Number: 695
Posted: Mon, Apr 22, 2019 1:52 PM
Last Updated: Tue, Apr 23, 2019 2:44 PM

Online URL: https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=695