Yes, much of Maretron device's data can be shown on Furuno displays with “CANBUS” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the transmit PGN section of the datasheet (page 2). Second, review the Chart plotters datasheet for Received PGN list for display to confirm the compatibility.
Please note: Maretron devices allow for multi message distinction for example: PGN 130314(Temperature) allows for source selection with instance number selection, a configuration that can only be adjusted using a Maretron interface. The device configuration can be performed using a Maretron DSM150/250/410 or our N2KAnalyzer software tool only.
Article Number: 672
Posted: Mon, Jun 12, 2017 4:19 PM
Last Updated: Tue, Aug 22, 2017 6:10 PM
Online URL: https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=672