How do I configure a DCR100 channel to work as an annunciator for an N2KView Alert?

The DCR100 offers two types of channel configuration:

The annunciator configuration allows for N2KView to command a DCR100 channel to close a relay when an alert is configured to have an action,
as shown in Figure 1 below.

Figure 1.

This type of configuration is ideal when the vessel requires a relay to energize an on board strobe light or alarm bell not connected directly to the NMEA 2000 network.

Once the DCR100 channel has been programmed to annunciator mode, the DCR100 channel can be selected in the alert action editor as shown in Figure 2.

Figure 2.

Shown in Figure 3 is an easy way to configure a DCR100 channel as an Alert/Annunciator channel.

Figure 3.

Article Number: 549
Posted: Wed, Oct 10, 2012 5:49 PM
Last Updated: Wed, Jul 29, 2015 7:04 PM

Online URL: