What is the default calibration setting for the RAA100?

The RAA100 default calibration mode is set to accept the American standard resistance values of 240 to 30 ohms (240 ohms representing 60 degrees to port and 30 ohms representing 60 degrees to starboard). This can be changed using Maretron's DSM150, DSM200, or DSM250 display to either the Europen standard or a custom calibration (custom calibration is used for setting the stop angles or non-standard resistance values).

Article Number: 279
Posted: Fri, Jul 11, 2008 5:17 PM
Last Updated: Fri, Jul 17, 2015 4:40 AM

Online URL: https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=279