If the TLA100 is connected and configured to operate in the "NMEA 2000 & Analog Gauge" mode, how do I connect the wires to the back of the analog gauge?

You connect the TLA100 operating in the NMEA 2000 & Analog Gauge mode to the gauge in the following way:

  1. connect the black wire to the gauge ground terminal
  2. connect the green wire to the gauge sensor terminal
  3. connect the red wire to the gauge power terminal.
Posted - Sun, Jun 22, 2008 8:47 PM. This article has been viewed 1911 times.
Online URL: https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=77