AXIS Camera Setup for N2KView
Within this article outlines a basic setup guideline for integrating your AXIS camera or AXIS encoder that is connected to the same LAN as your device running N2KView (TSM, MBB, and/or computer).
Access your AXIS camera via your browser using either the IP Address or AXIS Device Manager application.
The Overview page layout may differ between different generations of cameras, the concept will remain the same.
If you want to access your camera without typing a username or password...
By completing the first two settings, most camera setups would be complete.
Access the Settings tab
Locate and access the System tab
Scroll through the Network settings to locate HTTP Authentication Policy
Scroll to the bottom of the page and select Save.
Please refer to the latest User Manual of N2KView for proper setup within N2KView V3.
Contact technical support if you have any additional questions.
|Posted - Tue, Feb 16, 2021 11:06 PM. This article has been viewed 1370 times.|
|Online URL: https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=714|