I do not see video within N2KView Camera Setup; what does this mean?

If you have set the camera configuration and video still does not appear, please do the following:

  • Confirm the PC or Maretron Display is connected to the LAN network a camera is installed. 
  • Run the Axis Camera Setup tool and confirm that the camera is visible in the list of cameras displayed by the tool.
  • Confirm that the IP address of the camera matches the IP address you have set in the Camera Setup of N2KView.
  • Confirm that port 80 is not blocked by your computer's firewall software.


Posted - Mon, Sep 17, 2012 3:38 PM. This article has been viewed 2691 times.
Online URL: https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=553