Knowledge Base
Home » Categories » User Interface Hardware » MBB100(Discontinued)
All Categories
MBB100(Discontinued) Articles RSS Feed
What are the latest changes that have been made to N2KView on Maretron’s Legacy Devices?
Viewed 12736 times since Thu, Apr 3, 2014
Maretron announces the release of version 5.1.12 of the N2KView® NMEA 2000® Network Display Software. The program is available from (https://www.maretron.com) under the Updates tab of the device that you are updating. The full build number of the ver... Read More
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 25732 times since Tue, Oct 25, 2011
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder.  To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More
What video system can be used with N2KView?
Viewed 9021 times since Wed, Oct 10, 2012
N2KView is designed to display data from IP cameras produced by AXIS Communications, with the exception of the "Companion Series", that provide:Video StreamMotion jpg (mjpg) video formatVAPIX interfaceAnonymous Login Viewing Enabled- If you want to a... Read More
What are the voltage specifications for each Maretron device?
Viewed 8442 times since Thu, Dec 22, 2011
Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
What IP settings does Maretron recomended for the IPG100 connection to a dedicated N2KView device (DSM800 or MBB100) to work properly?
Viewed 5986 times since Thu, Mar 31, 2011
Maretron recommends the following configuration setting to successfully make a connection between N2KView running on a DSM800 or MBB100 to the IPG100. First, configure the IPG100 using N2KAnalyzer, a DSM150, or a DSM250. The procedure for configuring... Read More
What is the SMS100 Status message? Which Maretron components do I need?
Viewed 5142 times since Thu, Jun 6, 2013
The SMS100 Status Message is a text message you can receive from the SMS100 containing key pieces of information regarding your vessel. When the SMS100 is installed, you can text the word "Status"  to your SMS100 cellular number and receive a respons... Read More
What is the procedure for testing the ALM100 Annunciator?
Viewed 4997 times since Thu, Jan 8, 2015
The procedure for testing an ALM100 can be performed using the following Maretron User Interface products:DSM150/DSM250:Go to Main Menu-->Scroll to Configuration-->Select "Device Configuration"-->Select the ALM00 you wish to test-->Scroll to "Test An... Read More
Can I receive alerts via email from N2KView?
Viewed 4741 times since Fri, Jun 21, 2019
Yes, you are able to receive an email message alert so no matter where the user(s) is, you can be notified.* This requires the transmitting device (Computer, MBB or TSM) to have internet access and an active email account in order to transmit the ale... Read More
What information is available from the temperature monitor (TMP100) and can be viewed on Maretron’s displays?
Viewed 4634 times since Fri, Jun 21, 2013
 The TMP100 is capable of transmitting the following information:Sea TemperatureOutside TemperatureInside TemperatureEngine Room TemperatureMain Cabin TemperatureLive Well TemperatureBait Well TemperatureRefrigeration TemperatureHeating System Temper... Read More
What are the minimum and maximum supported display resolutions for the MBB100 VGA output?
Viewed 4092 times since Tue, Sep 4, 2012
The maximum supported display resolution for the MBB100 VGA output is 1900x1200.The minimum supported display resolution is 800x480.To review your resolution settings on the MBB100, in N2KView, select the "Commands & Settings->Configuration->Scre... Read More
How do I save or load a config file in N2KView?
Viewed 3830 times since Thu, May 2, 2019
Saving a N2KView config file to a USB device.1. Insert a USB flash drive into an available USB port on your device.2. From the main screen, tap to reveal the available tabs and select Commands and Settings on the right.3. Select tab labeled Configura... Read More
What information is available from the J1939 to NMEA 2000 Bridge (J2K100) and can be viewed on Maretron’s displays?
Viewed 3684 times since Mon, Jun 24, 2013
 The J2K100 is capable of transmitting the following information:PGN 65030AC Generator CurrentAC Generator FrequencyAC Generator VoltageEngine parameters 127488, 127489TachometerEngine HoursCoolant PressureCoolant Water TemperatureEngine Oil Pressure... Read More
What information is available from the fluid pressure monitor (FPM100) and can be viewed on Maretron’s displays?
Viewed 3535 times since Fri, Jun 21, 2013
 The FPM100 is capable of transmitting the following information: Pressures:Atmospheric PressureWater PressureSteam PressureCompressed Air PressureHydraulic PressureUser Defined 129 to 144Tank Types:Fuel Level, CapacityFresh Water Level, CapacityWast... Read More
I see N2KView offers a component for "Indicator Status"; what products can I use to show Indicator Status?
Viewed 3506 times since Fri, Mar 27, 2015
An Indicator Status component uses the NMEA 2000 message called "Binary Switch Bank Status" to show three condition states:OnOffErrorA RIM100, SIM100, and DCR100 all transmit the necessary message for the N2KView component to work.You can create seve... Read More
How do I set up my SMS100 address book using Maretron displays?
Viewed 3259 times since Thu, Jun 6, 2013
SMS100 Operational Requirements: Working NMEA2000 networkSMS100 text moduleDSM150/DSM250 display with firmware version 1.4.18.8 or higher N2KView software/hardware versions 3.6.2 or higherThe SMS100 requires a Maretron display to produce alert messag... Read More
I do not see video within N2KView Camera Setup; what does this mean?
Viewed 3127 times since Mon, Sep 17, 2012
If you have set the camera configuration and video still does not appear, please do the following:Confirm the PC or Maretron Display is connected to the LAN network a camera is installed. Run the Axis Camera Setup tool and confirm that the camera is ... Read More
Which touch screen drivers work with the MBB100 and MBB200C?
Viewed 2832 times since Tue, Dec 3, 2013
Touchscreen Drivers that the MBB100 and MBB200C will support are: eGalax     NavPixel Screens 3M         3M Microtouch ELO        ELO Touch Systems TSharc    Hampshire TSharc driversUpon connecting your touch screen to the MBB100 or MBB200C, sele... Read More
Which Martron products work with the ALM100?
Viewed 2479 times since Wed, Jun 22, 2016
The ALM100 can be commanded to annunciate by way of Maretron Displays(excluding legacy DSM200) or PC software N2KView(alerts enabled) only. Third-Party devices, Chart-plotters, and MFDs are not compatible to with the ALM100.  Read More
 
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.
 
Copyright© 2019 Carling Technologies. All rights reserved. Visit Carling Technologies, a partner company.