Maretron's Temperature Monitor (TMP100) has six channels for connecting up to six temperature probes. Two channels accommodate K-Type thermocouples and the remaining four channels accommodate thermistor type temperature probes. Maretron offers b... Read More

Please see the attached PDF file for the dimension of the EGT probe. Read More

The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder.  To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More

No. Maretron's EGT sensor is meant to measure the temperature of the exhaust gas temperature, not the temperature of the exhaust gas after it has been cooled by water. Placing the EGT probe downstream of the riser or elbow will render the device inop... Read More

Yes, many of Maretron device's data can be displayed on Raymarine Chart-plotters With Seatalk and Seatalk ng functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datashee... Read More

Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More

Yes, much of Maretron device's data can be shown on Garmin displays with “NMEA 2000” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the tran... Read More

Maretron thermistor probes come with 6' long wires. Yes, you can extend Maretron TMP100 sensor wires to complete temperature sensing applications throughout a vessel.In many applications technicians have extended thermistor wires up to 100 feet ... Read More

Occasionally, a device can be in "boot mode" (represented in N2KAnalyzer by an orange highlight of the device's entry in the device list). This can happen due to a software update which fails due to network problems.A Maretron device that is not... Read More

The SMS100 Status Message is a text message you can receive from the SMS100 containing key pieces of information regarding your vessel. When the SMS100 is installed, you can text the word "Status"  to your SMS100 cellular number and receive a respons... Read More

A #4 Nylon Double-Crimp Insulated Ring Terminal(P/N:WT-651045) is the ideal choice when connecting sensor wire to any of Maretron's multi channel devices.The following link provides a great color selection to choose from: http://www.wiringprodu... Read More

Yes, much of Maretron device's data can be shown on Furuno displays with “CANBUS” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the transmi... Read More

 The TMP100 is capable of transmitting the following information:Sea TemperatureOutside TemperatureInside TemperatureEngine Room TemperatureMain Cabin TemperatureLive Well TemperatureBait Well TemperatureRefrigeration TemperatureHeating System Temper... Read More

Matretron's TMP100 has two high temperature channels uniquely designed for K-Type Thermocouple solutions. There are many applications the K-Type thermocouple sensor is well suited for such as Exhaust Gas, turbo charger charged air temperature, a... Read More

You configure a channel on the TMP100 in the following way. Enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and press enter. Scroll to the row containing TMP100 and press enter. Select one of six channel... Read More

TMP100 Firmware Versions:1.1.1 (2009-02-23)- Added support for labeling so that the device can easilybe identified with a user-programmable string 1.0.3 (2008-11-10)- Allow channels to be programmed with different sourcetypes but the same instan... Read More

Use the N2KAnalyzer software program or a Maretron DSM150, or Maretron DSM250 to perform Maretron Device level configuration. This article will show methods for configuring the TMP100 Using Maretron's N2KAnalyzer software tool.  Pre-requisits:PC... Read More

Yes, a TMP100 can be installed to monitor engine coolant temperature by simply using one of the two available high temperature channels located on the TMP100. Simply order an additional Maretron TP-EGT-1 accessory for the primary purpose to monitor y... Read More

You display temperature from a TMP100 using the DSM250 in the following way. Enter menu mode (press the enter or far right hand button), scroll to "Favorite Screen Setup…" and press enter. Scroll to the favorite screen where you would like to view th... Read More