- Products
- User Interface Software
- User Interface Hardware (Displays, Annunciators etc.)
- NMEA 2000® gateways and bridges
- Tank monitoring
- Engine monitoring
- Electrical Monitoring and Control
- Digital Switching (MPower)
- General systems monitoring/recording
- Navigation instruments
- NMEA 2000® Cables and connectors
- Price List (pdf)
- Legacy products
- DSM150
3.5" high bright color display - DSM250
5.7" Multi-function color display - EMS100
Analog engine monitoring system - MBB100
Black box vessel monitoring and control - MBB200C
Black box vessel monitoring and control - SSC200
Solid state compass - TLM200
Tank level monitor (104") - TSM800
8" vessel monitoring and control touchscreen - TSM800C
8" vessel monitoring and control touchscreen - TSM1330
13.3" vessel monitoring and control touchscreen - TSM1330C
13.3" vessel monitoring and control touchscreen - WSO100
Ultrasonic wind and weather station
- DSM150
- Suggested Systems
- Application System Examples
- Battery Monitoring
- Battery Switch Monitoring and Control
- Bilge Monitoring and Control
- Digital Switching
- Engine Monitoring
- Fuel Flow / Economy / Trip Computer
- Fuel Filter Monitoring
- Generator Monitoring
- Indoor/Outdoor Weather Monitoring
- Indoor Temperature and Humidity Monitoring
- Shore Power Monitoring
- Security Monitoring
- Swing Meter
(Rate of Turn) - Tank Monitoring
- Telemetric Cloud Service
- Vessel Tracking (N2KTracker®)
- Product System Examples
- ACM100 Alternating Current Monitor
- DCM100 Direct Current Monitor
- FFM100 Fluid Flow Monitor
- FPM100 Fluid Pressure Monitor
- GPS200 Antenna/Receiver
- J2K100 J1939 to NMEA 2000 Gateway
- NBE100 Network Bus Extender
- RAA100 Rudder Angle Adapter
- SSC300 Solid State Compass
- SMS100 Text Messaging
- TLA100 Tank level adapter
- TLM100 Tank level monitor
- TLM150 Tank level monitor
- TMP100 Temperature monitor
- WSO100 Ultrasonic Wind and Weather Station
- Sailboat System Examples
- Trawler System Examples
- Recreational Fishing Yacht System Examples
- Workboat System Examples
- Application System Examples
- Support
- Company
- How to buy
Knowledge Base
KB Home | Search | Glossary | Ask Question |  English |
|
|
|
DSM200(Discontinued) Articles   Subscribe
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 25598 times since Tue, Oct 25, 2011
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder. To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More
What are the voltage specifications for each Maretron device?
Viewed 8314 times since Thu, Dec 22, 2011
Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
Using N2KAnalyzer, how do I recover a Maretron device?
Viewed 5311 times since Thu, Dec 22, 2011
Occasionally, a device can be in "boot mode" (represented in N2KAnalyzer by an orange highlight of the device's entry in the device list). This can happen due to a software update which fails due to network problems.A Maretron device that is not... Read More
How do I display the J2K100 engine hours on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 4458 times since Thu, Jan 14, 2010
You display the J2K100 engine hours on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the hours and press enter. Scro... Read More
What sensors does Maretron recommend for basic navigation?
Viewed 4396 times since Wed, Apr 10, 2013
A standard Maretron NMEA2000 navigation sensor network consists of the following components:Compass: SSC200GPS: GPS200Depth Speed Water: DST110Weather: WSO100Display: DSM150System Capabilities:Wind ApparentSpeed over groundCourse over groundSpeed thr... Read More
How do I display the J2K100 engine oil temperature on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 4343 times since Thu, Jan 14, 2010
You display the J2K100 engine oil temperature on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the oil temperature a... Read More
How do I display the J2K100 transmission gear on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 4169 times since Thu, Jan 14, 2010
You display the J2K100 transmission gear on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the gear and press enter. ... Read More
What firmware changes have taken place on the Maretron DSM200?
Viewed 4115 times since Tue, Jan 17, 2012
What firmware changes have taken place on the Maretron DSM200?Firmware updates not long planned for this model. 2011DSM200 Firmware Versions: 1.15.0 (2006-12-21)- Added support for alarms on tank levels 1.14.1 (2006-10-03)- Corrected some transl... Read More
How do I display the J2K100 engine fuel rate on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 4051 times since Thu, Jan 14, 2010
You display the J2K100 engine fuel rate on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the fuel rate and press ent... Read More
How do I set the J2K100 configuration setting called "NMEA 2000 Transmission Instance:" using Maretron’s DSM150 or DSM250 display?
Viewed 3995 times since Thu, Jan 14, 2010
You set the J2K100 configuration setting called "NMEA 2000 Transmission Instance:" using Maretron's DSM150, DSM200, or DSM250 display in the following way. Enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?"... Read More
How do I display the J2K100 engine boost pressure on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3986 times since Thu, Jan 14, 2010
You display the J2K100 engine boost pressure on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the boost pressure and... Read More
How do I display the J2K100 engine fuel pressure on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3968 times since Thu, Jan 14, 2010
You display the J2K100 engine fuel pressure on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the fuel pressure and p... Read More
How do I set the J2K100 configuration setting called "NMEA 2000 Engine Instance:" using Maretron’s DSM150 or DSM250 display?
Viewed 3927 times since Thu, Jan 14, 2010
You set the J2K100 configuration setting called "NMEA 2000 Engine Instance:" using Maretron's DSM150, DSM200, or DSM250 display in the following way. Enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and p... Read More
How do I display the J2K100 engine oil pressure on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3901 times since Thu, Jan 14, 2010
You display the J2K100 engine oil pressure on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the oil pressure and pre... Read More
How do I display the J2K100 generator average line-neutral AC RMS voltage on Maretron’s DSM150 or DSM250 display?
Viewed 3800 times since Thu, Jan 14, 2010
You display the J2K100 generator average line-neutral AC voltage on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view th... Read More
How do I display the J2K100 transmission oil pressure on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3738 times since Thu, Jan 14, 2010
You display the J2K100 transmission oil pressure on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the oil pressure a... Read More
How do I clear the WSO100 atmospheric pressure offset using Maretron’s DSM150 or DSM250 display?
Viewed 3726 times since Sat, Aug 2, 2008
You clear the WSO100 atmospheric pressure offset using Maretron's DSM150 or DSM250 display in the following way:Enter menu mode, scroll to "Configuration…" and press < Enter >Scroll to "Device Configuration…" and press < Enter >Scroll to the row... Read More
How do I display the TLA100, TLM100, TLM150, or TLM200 tank capacity on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3725 times since Fri, Jun 20, 2008
You display the TLA100 tank capacity on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view the tank capacity and press <... Read More
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "Reset Factory Defaults"; what is this?
Viewed 3661 times since Thu, Jan 14, 2010
Maretron's DSM150, DSM200,and DSM250 displays have a J2K100 configuration setting called "Reset Factory Defaults" which is used to return the J2K100 to its factory settings. Resetting the J2K100 to factory defaults sets the J1939 source address ... Read More
I see that Maretron’s DSM150, DSM200 and DSM250 displays have TLA100 configuration settings called "Gauge Resistance, + to sender:" and "Gauge Resistance, - to sender:"; what are these?
Viewed 3651 times since Mon, Jun 25, 2012
If the TLA100's operating mode is set to "NMEA 2000 & Analog Gauge", then it is important to configure the TLA100 with the gauge's resistances in order for the TLA100 to operate correctly. Please refer to the TLA100 Users Manual for a d... Read More
How do I display the J2K100 generator average line-line AC voltage on Maretron’s DSM150 or DSM250 display?
Viewed 3637 times since Thu, Jan 14, 2010
You display the J2K100 generator average line-line AC voltage on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the v... Read More
How do I display the J2K100 engine coolant pressure on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3609 times since Thu, Jan 14, 2010
You display the J2K100 engine coolant pressure on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the coolant pressure... Read More
How do I display the J2K100 engine percent load on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3558 times since Thu, Jan 14, 2010
You display the J2K100 engine percent load on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the percent load and pre... Read More
How do I display the J2K100 generator average AC frequency on Maretron’s DSM150 or DSM250 display?
Viewed 3541 times since Thu, Jan 14, 2010
You display the J2K100 generator average AC frequency on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the frequency... Read More
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "J1939 Diagnostic Messages:"; what is this?
Viewed 3533 times since Thu, Jan 14, 2010
Maretron's DSM150, DSM200,and DSM250 displays have a J2K100 configuration setting called "J1939 Diagnostic Messages:" which is used to configure the J2K100 to pass diagnostic messages from the J1939 network through to the NMEA 2000 network. Nor... Read More
How do I display the J2K100 transmission oil temperature on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3525 times since Thu, Jan 14, 2010
You display the J2K100 transmission oil temperature on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the oil tempera... Read More
How do I display the J2K100 engine coolant temperature on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3492 times since Sat, Jun 25, 2011
You display the J2K100 engine coolant temperature on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the coolant tempe... Read More
How do I display UTC from the GPS100 on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3447 times since Mon, Jun 25, 2012
You display UTC from the GPS100 on a DSM150, DSM200, or DSM250 in the following way:Enter menu mode (press the key or far right button), scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to vie... Read More
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "NMEA 2000 PGN Enable/Disable..."; what is this?
Viewed 3368 times since Thu, Jan 14, 2010
Maretron's DSM150, DSM200,and DSM250 displays have a J2K100 configuration setting called "NMEA 2000 PGN Enable/Disable?" which is used to turn on and off specific messages that are transmitted by the J2K100. Read More
How do I display the J2K100 generator average AC current on Maretron’s DSM150 or DSM250 display?
Viewed 3331 times since Thu, Jan 14, 2010
You display the J2K100 generator average AC current on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the current and... Read More
Is it possible to turn on or off J2K100 NMEA 2000 transmitted messages (or PGNs)?
Viewed 3215 times since Thu, Jan 14, 2010
Yes, it is possible to turn on and off the J2K100 transmitted messages (or PGNs) using Maretron's DSM150, DSM200, or DSM250 display. On the display, enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and pr... Read More
How do I clear the WSO100 outside humidity offset using Maretron’s DSM150 or DSM250 display?
Viewed 3009 times since Sat, Aug 2, 2008
You clear the WSO100 outside humidity offset using Maretron's DSM150 or DSM250 display in the following way:Enter menu mode, scroll to "Configuration…" and press < Enter >Scroll to "Device Configuration…" and press < Enter >Scroll to the row con... Read More
How do I create or edit a Favorite screen using the Maretron DSM150, DSM200, or DSM250?
Viewed 2740 times since Sun, Aug 17, 2008
Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to set your data info and press enter. Scroll to "Data:" and press enter. Scroll to the data type you wish to display and press ... Read More
How do I display the J2K100 engine speed or tachometer on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2149 times since Thu, Jan 14, 2010
You display the J2K100 tachometer on a DSM150, DSM200, or DSM250 in the following way.Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >Scroll to the favorite screen where you would like to view the tachometer and press < Enter... Read More
|
||||
|
|||||
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)