- Products
- User Interface Software
- User Interface Hardware (Displays, Annunciators etc.)
- NMEA 2000® gateways and bridges
- Tank monitoring
- Engine monitoring
- Electrical Monitoring and Control
- Digital Switching (MPower)
- General systems monitoring/recording
- Navigation instruments
- NMEA 2000® Cables and connectors
- Price List (pdf)
- Legacy products
- DSM150
3.5" high bright color display - DSM250
5.7" Multi-function color display - EMS100
Analog engine monitoring system - MBB100
Black box vessel monitoring and control - MBB200C
Black box vessel monitoring and control - SSC200
Solid state compass - TLM200
Tank level monitor (104") - TSM800
8" vessel monitoring and control touchscreen - TSM800C
8" vessel monitoring and control touchscreen - TSM1330
13.3" vessel monitoring and control touchscreen - TSM1330C
13.3" vessel monitoring and control touchscreen - WSO100
Ultrasonic wind and weather station
- DSM150
- Suggested Systems
- Application System Examples
- Battery Monitoring
- Battery Switch Monitoring and Control
- Bilge Monitoring and Control
- Digital Switching
- Engine Monitoring
- Fuel Flow / Economy / Trip Computer
- Fuel Filter Monitoring
- Generator Monitoring
- Indoor/Outdoor Weather Monitoring
- Indoor Temperature and Humidity Monitoring
- Shore Power Monitoring
- Security Monitoring
- Swing Meter
(Rate of Turn) - Tank Monitoring
- Telemetric Cloud Service
- Vessel Tracking (N2KTracker®)
- Product System Examples
- ACM100 Alternating Current Monitor
- DCM100 Direct Current Monitor
- FFM100 Fluid Flow Monitor
- FPM100 Fluid Pressure Monitor
- GPS200 Antenna/Receiver
- J2K100 J1939 to NMEA 2000 Gateway
- NBE100 Network Bus Extender
- RAA100 Rudder Angle Adapter
- SSC300 Solid State Compass
- SMS100 Text Messaging
- TLA100 Tank level adapter
- TLM100 Tank level monitor
- TLM150 Tank level monitor
- TMP100 Temperature monitor
- WSO100 Ultrasonic Wind and Weather Station
- Sailboat System Examples
- Trawler System Examples
- Recreational Fishing Yacht System Examples
- Workboat System Examples
- Application System Examples
- Support
- Company
- How to buy
Knowledge Base
KB Home | Search | Glossary | Ask Question |  English |
|
|
|
USB100 Articles   Subscribe
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 25729 times since Tue, Oct 25, 2011
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder. To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More
Does Maretron have a Linux driver for the USB100?
Viewed 19573 times since Fri, Sep 11, 2009
The USB100 is compatible with Linux using standard CDC-ACM drivers available within the OS. Read More
What are the voltage specifications for each Maretron device?
Viewed 8439 times since Thu, Dec 22, 2011
Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
Does the USB100 convert NMEA 2000 engine PGNs to NMEA 0183 sentences?
Viewed 6339 times since Mon, Jan 18, 2010
Yes, the USB100 converts some of the NMEA 2000 engine PGN information into NMEA 0183 sentences. Please refer to the document entitled “USB100 Engine Sentences.pdf”, which can be found below in the Attachments section. Read More
Does Maretron make a waterproof USB cable for connecting the USB100 to a computer?
Viewed 5621 times since Thu, Apr 8, 2010
No, Maretron does not make a waterproof USB cable for connection between the USB100 and a computer. However, a waterproof cable can be built using the following parts, which can be ordered from http://www.digikey.com/ :A-KAB-USBB-MS-1M-RA-USBPA-RA-U... Read More
Using N2KAnalyzer, how do I recover a Maretron device?
Viewed 5418 times since Thu, Dec 22, 2011
Occasionally, a device can be in "boot mode" (represented in N2KAnalyzer by an orange highlight of the device's entry in the device list). This can happen due to a software update which fails due to network problems.A Maretron device that is not... Read More
My USB100’s COM port is in use by the navigational program on my PC. Can N2KView use the same COM port?
Viewed 5280 times since Mon, Nov 17, 2008
The USB100 can only be in use by one program at a time. The remedy is to have one USB100 gateway for use by your navigational software, and a second USB100 gateway to simultaneously provide data to a vessel monitoring program, such as N2KView. Read More
Using GWUtilities, what mesages can I configure?
Viewed 4957 times since Fri, Jun 26, 2015
The table below shows a list of NMEA 2000 to NMEA 0183 translations performed by the USB100. A list of checkboxes representing possible NMEA 0183 translations from the selected NMEA 2000 PGN will appear on the right hand side of the window. S... Read More
Does the USB100 work with Mac OS/X?
Viewed 4661 times since Mon, Dec 14, 2009
Yes. The USB100 uses the standard CDCACM driver for Mac OS/X computers. Read More
What firmware changes have taken place on the Maretron USB100?
Viewed 4330 times since Mon, May 16, 2011
USB100 Firmware Versions:USB100 1.9.1.1 (2018-01-24):USB100 2.1.1.2:Added support for the latest NMEA2000 PGN (211)Added support for the NMEA 2000 Heartbeat Message (PGN 126993) (4435) 2.0.3.1(08-2016):Changed supported NMEA 2000 database version to ... Read More
GWUtilities and USB100 drivers
Viewed 4250 times since Mon, May 16, 2011
Changes in the USB100 Drivers and Support Software version 2.1 from version 2.0a: Support has been added for the following operating versions of Microsoft Windows:Windows XP 64-bitWindows Vista 64-bitWindows 7 32-bitWindows 7 64-bitIn addition to the... Read More
How can I tell which messages (PGNs) are being sent on the J1939 bus by an engine or genset?
Viewed 3610 times since Thu, Jun 23, 2011
Setting the USB100 in J1939 mode:Instructions:Please use Maretron N2KAnalyzer to ensure that the gateway has firmware revision 1.7.2 or later.Connect the USB100 gateway's NMEA 2000 connector to the J1939 bus. The connection is the same as the J... Read More
What is GWUtilities used for?
Viewed 2158 times since Fri, Jun 26, 2015
GWUtilities is a program that allows a user to configure the NMEA 2000 / NMEA 0183 translations performed by the Maretron USB100 NMEA 2000 / USB gateway. Normally, the translations programmed into the gateway at the factory should be satisfactory, bu... Read More
USB Driver Installation Errors - Code 52 & vendor.cer
Viewed 1483 times since Wed, Sep 7, 2022
With the release of N2KAnalyzer 3.0.4 we introduced a new USB driver that provided better support for Windows Operating Systems 7 - 11 for 32-bit and 64-bit architectures. The following errors may occur on Windows 7, 8, 8.1 installations while updati... Read More
|
||||
|
|||||
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)