- Products
- NMEA 2000® Cables and connectors
- Price List (pdf)
- Legacy products
- DSM150
3.5" high bright color display - EMS100
Analog engine monitoring system - MBB100
Black box vessel monitoring and control - MBB200C
Black box vessel monitoring and control - SSC200
Solid state compass - TLM200
Tank level monitor (104") - TSM800
8" vessel monitoring and control touchscreen - TSM800C
8" vessel monitoring and control touchscreen - TSM1330
13.3" vessel monitoring and control touchscreen - TSM1330C
13.3" vessel monitoring and control touchscreen - WSO100
Ultrasonic wind and weather station
- DSM150
- Application System Examples
- Battery Monitoring
- Battery Switch Monitoring and Control
- Bilge Monitoring and Control
- Engine Monitoring
- Fuel Flow / Economy / Trip Computer
- Fuel Filter Monitoring
- Generator Monitoring
- Indoor/Outdoor Weather Monitoring
- Indoor Temperature and Humidity Monitoring
- Shore Power Monitoring
- Security Monitoring
- Swing Meter
(Rate of Turn) - Tank Monitoring
- Telemetric Cloud Service
- Vessel Tracking (N2KTracker®)
- Product System Examples
- ACM100 Alternating Current Monitor
- DCM100 Direct Current Monitor
- FFM100 Fluid Flow Monitor
- FPM100 Fluid Pressure Monitor
- GPS200 Antenna/Receiver
- J2K100 J1939 to NMEA 2000 Gateway
- NBE100 Network Bus Extender
- RAA100 Rudder Angle Adapter
- SSC300 Solid State Compass
- SMS100 Text Messaging
- TLA100 Tank level adapter
- TLM100 Tank level monitor
- TLM150 Tank level monitor
- TMP100 Temperature monitor
- WSO100 Ultrasonic Wind and Weather Station
- Sailboat System Examples
- Trawler System Examples
- Recreational Fishing Yacht System Examples
- Workboat System Examples
Knowledge Base
KB Home | Search | Glossary | Ask Question |  English |
|
|
|
Micro, Mid, and Mini Articles   Subscribe
How do I make a custom NMEA 2000 cordset cable? Does Maretron offer a field attachable connector?
Viewed 8726 times since Wed, Oct 10, 2012
Maretron offers several accessories that allow you to make a custom NMEA 2000 cable.It may be necessary to make a custom cable for the following reasons:Cable runs longer than 10m in lengthRouting raw cables micro/mid through bulkheads, wire trays, a... Read More
What is a backbone or trunk line?
Viewed 5243 times since Fri, Apr 16, 2010
The backbone, or trunk line, is the main network line usually running stem to stern in the vessel. Each end of the backbone or trunk line has a termination resistor. Individual products are connected to the network using drop lines off the main backb... Read More
How do I connect a Maretron Field Makable Connector or Field Attachable to an NMEA2000 Cable?
Viewed 4581 times since Fri, Dec 2, 2016
The heart of the NMEA2000 system is the cabling infrastructure and it is vital that field connections are made correct to avoid damage to sensors or non-intelligent components such as tees, multi-ports, power-taps. Maretron offers four types of Field... Read More
Can I change the direction the elbow points for a 90 degree field attachable connector?
Viewed 3797 times since Wed, Jan 26, 2011
Yes, you can change the direction the elbow points for a 90 degree field attachable connector. When you assemble the field attachable connector, you can adjust the direction in which the elbow points by rotating the insert into one of the four availa... Read More
Some helpful information to installing your first or the next Maretron N2KNetwork.
Viewed 3408 times since Thu, Feb 3, 2011
This article provides a summary of steps and methods you should use to ensure your installation of a Maretron system goes smoothly. The process of installing an NMEA 2000 network, big or small, can be overwhelming. Following are methods that are curr... Read More
Does Maretron offer any recommendations for securing NMEA 2000 cabling?
Viewed 3312 times since Fri, Mar 2, 2012
Maretron cabling has been designed to withstand harsh environments during operation.Securing the cabling properly is very important to ensure long term functionality and use.Illustration 1 provides a best practices of securing cable. Maretron recomen... Read More
Should I use double-ended cordsets or should I build my own cables using bulk cable and field-attachable connectors?
Viewed 3152 times since Fri, Apr 16, 2010
If possible, you should consider using overmolded double-ended cordsets since they are less expensive and they tend to be more reliable than cables made using bulk cable and field-attachable connectors. Unfortunately, overmolded double-ended cordsets... Read More
Does Maretron N2K cabling have a fire resistance specification?
Viewed 2145 times since Thu, Dec 20, 2012
Maretron cabling has the following fire resistance specifications:NEC PLTC(E) Type PLTC . Type PLTC nonmetallic-sheathed, power-limited tray cable shall be listed as being suitable for cable trays and shall consist of a factory assembly of two or m... Read More
|
||||
|
|||||
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)