- Products
- User Interface Software
- User Interface Hardware (Displays, Annunciators etc.)
- NMEA 2000® gateways and bridges
- Tank monitoring
- Engine monitoring
- Electrical Monitoring and Control
- Digital Switching (MPower)
- General systems monitoring/recording
- Navigation instruments
- NMEA 2000® Cables and connectors
- Price List (pdf)
- Legacy products
- DSM150
3.5" high bright color display - DSM250
5.7" Multi-function color display - EMS100
Analog engine monitoring system - MBB100
Black box vessel monitoring and control - MBB200C
Black box vessel monitoring and control - SSC200
Solid state compass - TLM200
Tank level monitor (104") - TSM800
8" vessel monitoring and control touchscreen - TSM800C
8" vessel monitoring and control touchscreen - TSM1330
13.3" vessel monitoring and control touchscreen - TSM1330C
13.3" vessel monitoring and control touchscreen - WSO100
Ultrasonic wind and weather station
- DSM150
- Suggested Systems
- Application System Examples
- Battery Monitoring
- Battery Switch Monitoring and Control
- Bilge Monitoring and Control
- Digital Switching
- Engine Monitoring
- Fuel Flow / Economy / Trip Computer
- Fuel Filter Monitoring
- Generator Monitoring
- Indoor/Outdoor Weather Monitoring
- Indoor Temperature and Humidity Monitoring
- Shore Power Monitoring
- Security Monitoring
- Swing Meter
(Rate of Turn) - Tank Monitoring
- Telemetric Cloud Service
- Vessel Tracking (N2KTracker®)
- Product System Examples
- ACM100 Alternating Current Monitor
- DCM100 Direct Current Monitor
- FFM100 Fluid Flow Monitor
- FPM100 Fluid Pressure Monitor
- GPS200 Antenna/Receiver
- J2K100 J1939 to NMEA 2000 Gateway
- NBE100 Network Bus Extender
- RAA100 Rudder Angle Adapter
- SSC300 Solid State Compass
- SMS100 Text Messaging
- TLA100 Tank level adapter
- TLM100 Tank level monitor
- TLM150 Tank level monitor
- TMP100 Temperature monitor
- WSO100 Ultrasonic Wind and Weather Station
- Sailboat System Examples
- Trawler System Examples
- Recreational Fishing Yacht System Examples
- Workboat System Examples
- Application System Examples
- Support
- Company
- How to buy
Knowledge Base
KB Home | Search | Glossary | Ask Question |  English |
|
|
|
J2K100 Articles   Subscribe
Does Maretron have a interface cable for Caterpillar engine networks to the J2K100 device?
Viewed 67168 times since Tue, Apr 5, 2011
The MCF-2M-D12CAT cable is used to interface a J2K100 to a CAT marine power display. It is recommended that the MCF-2M-D12CAT cable should connect to one of two ports on the CAT display. The ideal connection should be the occupied twelve pin connecto... Read More
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 25729 times since Tue, Oct 25, 2011
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder. To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More
Can the J2K100 connect to third party protocol converters that support J1708 or J1587?
Viewed 12274 times since Fri, Aug 29, 2014
Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 data to NMEA 2000. For engines that offer protocols such as J1708 or J1587, users may choose to translate the engine... Read More
Can Maretron devices be displayed on a Raymarine Seatalk NG network?
Viewed 10763 times since Wed, Feb 25, 2015
Yes, many of Maretron device's data can be displayed on Raymarine Chart-plotters With Seatalk and Seatalk ng functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datashee... Read More
What are the voltage specifications for each Maretron device?
Viewed 8439 times since Thu, Dec 22, 2011
Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
Can Maretron’s sensor data be displayed on a Garmin network?
Viewed 8139 times since Mon, Jun 12, 2017
Yes, much of Maretron device's data can be shown on Garmin displays with “NMEA 2000” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the tran... Read More
How do I connect the Dometic Q-logic controller to the J2K100 for N2KView control?
Viewed 5346 times since Thu, Feb 23, 2017
First, you will need to purchase or connect the Q-logic J1939 board or confirm you have one already working on board your vessel. Figure 1 illustrates what the Q-logic J1939 interface should look like.Once you can confirm the J1939 interface is conne... Read More
Can Maretron’s sensor data be displayed on a Furuno CANBUS network?
Viewed 4752 times since Mon, Jun 12, 2017
Yes, much of Maretron device's data can be shown on Furuno displays with “CANBUS” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the transmi... Read More
Does Maretron offer quick setup instructions for a dual J2K100 setup?
Viewed 4586 times since Wed, Jan 15, 2020
Does Maretron offer quick setup instructions for a dual J2K100 setup?Refer to this article for help on setting up your J2K100s especially when connected to the following engine manufacturers J1939 networks:Caterpillar, John Deere, Cummins, Steyr, ECU... Read More
Duel/Split Screen Engine Display template for TSMxxx/MBBxxx
Viewed 3400 times since Fri, Jul 12, 2019
Below are sample images of the attached .nvs screen files.Port Engine 1 & Stbd Engine 1 .nvs files Port Engine 2 & Stbd Engine 2 .nvs How to load screens onto TSMxxx/MBBxxx or PC running N2KView.Copy the .nvs (Screen File) onto a USB flash d... Read More
|
||||
|
|||||
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)