Knowledge Base
Home » Categories » User Interface Hardware » MBB200C (Discontinued)
All Categories
MBB200C (Discontinued) Articles RSS Feed
What are the latest changes that have been made to N2KView on Maretron’s Legacy Devices?
Viewed 12736 times since Thu, Apr 3, 2014
Maretron announces the release of version 5.1.12 of the N2KView® NMEA 2000® Network Display Software. The program is available from (https://www.maretron.com) under the Updates tab of the device that you are updating. The full build number of the ver... Read More
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 25729 times since Tue, Oct 25, 2011
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder.  To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More
What video system can be used with N2KView?
Viewed 9016 times since Wed, Oct 10, 2012
N2KView is designed to display data from IP cameras produced by AXIS Communications, with the exception of the "Companion Series", that provide:Video StreamMotion jpg (mjpg) video formatVAPIX interfaceAnonymous Login Viewing Enabled- If you want to a... Read More
What are the voltage specifications for each Maretron device?
Viewed 8439 times since Thu, Dec 22, 2011
Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
What is the procedure for testing the ALM100 Annunciator?
Viewed 4996 times since Thu, Jan 8, 2015
The procedure for testing an ALM100 can be performed using the following Maretron User Interface products:DSM150/DSM250:Go to Main Menu-->Scroll to Configuration-->Select "Device Configuration"-->Select the ALM00 you wish to test-->Scroll to "Test An... Read More
Can I receive alerts via email from N2KView?
Viewed 4734 times since Fri, Jun 21, 2019
Yes, you are able to receive an email message alert so no matter where the user(s) is, you can be notified.* This requires the transmitting device (Computer, MBB or TSM) to have internet access and an active email account in order to transmit the ale... Read More
How do I save or load a config file in N2KView?
Viewed 3819 times since Thu, May 2, 2019
Saving a N2KView config file to a USB device.1. Insert a USB flash drive into an available USB port on your device.2. From the main screen, tap to reveal the available tabs and select Commands and Settings on the right.3. Select tab labeled Configura... Read More
What is the serial port Pinout of CAN1 and CAN 2 located on the MBB200C?
Viewed 3772 times since Thu, Mar 16, 2017
The MBB200C has two separate CAN connections used for connecting to a NMEA2000 network. Use single NMEA2000 connection for a single vessels NMEA2000 network or both connections if you have installed two indapendant NMEA2000 networks you want to displ... Read More
I see N2KView offers a component for "Indicator Status"; what products can I use to show Indicator Status?
Viewed 3504 times since Fri, Mar 27, 2015
An Indicator Status component uses the NMEA 2000 message called "Binary Switch Bank Status" to show three condition states:OnOffErrorA RIM100, SIM100, and DCR100 all transmit the necessary message for the N2KView component to work.You can create seve... Read More
How do I set up My Maretron Telemetric Cloud Service?
Viewed 3432 times since Mon, Oct 24, 2016
Maretron Telemetric Cloud Service (TCS) offers an extremely powerful way to send periodic data from the Maretron vessel monitoring and control system onboard your vessel to a cloud based storage service. Simply connect your Maretron Black Box (MBB200... Read More
I do not see video within N2KView Camera Setup; what does this mean?
Viewed 3126 times since Mon, Sep 17, 2012
If you have set the camera configuration and video still does not appear, please do the following:Confirm the PC or Maretron Display is connected to the LAN network a camera is installed. Run the Axis Camera Setup tool and confirm that the camera is ... Read More
Which Martron products work with the ALM100?
Viewed 2476 times since Wed, Jun 22, 2016
The ALM100 can be commanded to annunciate by way of Maretron Displays(excluding legacy DSM200) or PC software N2KView(alerts enabled) only. Third-Party devices, Chart-plotters, and MFDs are not compatible to with the ALM100.  Read More
How do I extract Maretron Telemetric Cloud Service data using N2KExtractor?
Viewed 2387 times since Mon, Oct 24, 2016
Extracting Telemetric Cloud Service (TCS) data from your vessel for review with N2KExtractor requires an Internet connection.First, start N2KExtractor on your PC. Go to File->Connect to Telemetric Cloud Service (see Figure 1). You will be prompted to... Read More
I see that the DCR100 has a configuration feature called Operating Mode, What does this mean?
Viewed 2321 times since Thu, Mar 23, 2017
DCR100 channels have two possible operating modes: “Normal”, in which the DCR100 channel responds to standard NMEA 2000 switching commands, and “Annunciator”, in which the channel may be connected to a power source for a sounder or a light to be acti... Read More
 
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.
 
Copyright© 2019 Carling Technologies. All rights reserved. Visit Carling Technologies, a partner company.