- Products
- User Interface Software
- User Interface Hardware (Displays, Annunciators etc.)
- NMEA 2000® gateways and bridges
- Tank monitoring
- Engine monitoring
- Electrical Monitoring and Control
- Digital Switching (MPower)
- General systems monitoring/recording
- Navigation instruments
- NMEA 2000® Cables and connectors
- Price List (pdf)
- Legacy products
- DSM150
3.5" high bright color display - DSM250
5.7" Multi-function color display - EMS100
Analog engine monitoring system - MBB100
Black box vessel monitoring and control - MBB200C
Black box vessel monitoring and control - SSC200
Solid state compass - TLM200
Tank level monitor (104") - TSM800
8" vessel monitoring and control touchscreen - TSM800C
8" vessel monitoring and control touchscreen - TSM1330
13.3" vessel monitoring and control touchscreen - TSM1330C
13.3" vessel monitoring and control touchscreen - WSO100
Ultrasonic wind and weather station
- DSM150
- Suggested Systems
- Application System Examples
- Battery Monitoring
- Battery Switch Monitoring and Control
- Bilge Monitoring and Control
- Digital Switching
- Engine Monitoring
- Fuel Flow / Economy / Trip Computer
- Fuel Filter Monitoring
- Generator Monitoring
- Indoor/Outdoor Weather Monitoring
- Indoor Temperature and Humidity Monitoring
- Shore Power Monitoring
- Security Monitoring
- Swing Meter
(Rate of Turn) - Tank Monitoring
- Telemetric Cloud Service
- Vessel Tracking (N2KTracker®)
- Product System Examples
- ACM100 Alternating Current Monitor
- DCM100 Direct Current Monitor
- FFM100 Fluid Flow Monitor
- FPM100 Fluid Pressure Monitor
- GPS200 Antenna/Receiver
- J2K100 J1939 to NMEA 2000 Gateway
- NBE100 Network Bus Extender
- RAA100 Rudder Angle Adapter
- SSC300 Solid State Compass
- SMS100 Text Messaging
- TLA100 Tank level adapter
- TLM100 Tank level monitor
- TLM150 Tank level monitor
- TMP100 Temperature monitor
- WSO100 Ultrasonic Wind and Weather Station
- Sailboat System Examples
- Trawler System Examples
- Recreational Fishing Yacht System Examples
- Workboat System Examples
- Application System Examples
- Support
- Company
- How to buy
Knowledge Base
KB Home | Search | Glossary | Ask Question |  English |
|
|
|
TSM800(Discontinued) Articles   Subscribe
What are the latest changes that have been made to N2KView on Maretron’s Legacy Devices?
Viewed 12645 times since Thu, Apr 3, 2014
Maretron announces the release of version 5.1.12 of the N2KView® NMEA 2000® Network Display Software. The program is available from (https://www.maretron.com) under the Updates tab of the device that you are updating. The full build number of the ver... Read More
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 25598 times since Tue, Oct 25, 2011
The Maretron Capability Matrix helps highlight the system features available for display when designing a system within N2KBuilder. To generate a system capability Matrix within N2KBuilder simply click on Tools, "Create Maretron Capability Matrix". ... Read More
What video system can be used with N2KView?
Viewed 8758 times since Wed, Oct 10, 2012
N2KView is designed to display data from IP cameras produced by AXIS Communications, with the exception of the "Companion Series", that provide:Video StreamMotion jpg (mjpg) video formatVAPIX interfaceAnonymous Login Viewing Enabled- If you want to a... Read More
What are the voltage specifications for each Maretron device?
Viewed 8315 times since Thu, Dec 22, 2011
Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
What is the SMS100 Status message? Which Maretron components do I need?
Viewed 5060 times since Thu, Jun 6, 2013
The SMS100 Status Message is a text message you can receive from the SMS100 containing key pieces of information regarding your vessel. When the SMS100 is installed, you can text the word "Status" to your SMS100 cellular number and receive a respons... Read More
What is the procedure for testing the ALM100 Annunciator?
Viewed 4910 times since Thu, Jan 8, 2015
The procedure for testing an ALM100 can be performed using the following Maretron User Interface products:DSM150/DSM250:Go to Main Menu-->Scroll to Configuration-->Select "Device Configuration"-->Select the ALM00 you wish to test-->Scroll to "Test An... Read More
What information is available from the temperature monitor (TMP100) and can be viewed on Maretron’s displays?
Viewed 4549 times since Fri, Jun 21, 2013
The TMP100 is capable of transmitting the following information:Sea TemperatureOutside TemperatureInside TemperatureEngine Room TemperatureMain Cabin TemperatureLive Well TemperatureBait Well TemperatureRefrigeration TemperatureHeating System Temper... Read More
Can I receive alerts via email from N2KView?
Viewed 4534 times since Fri, Jun 21, 2019
Yes, you are able to receive an email message alert so no matter where the user(s) is, you can be notified.* This requires the transmitting device (Computer, MBB or TSM) to have internet access and an active email account in order to transmit the ale... Read More
How do I save or load a config file in N2KView?
Viewed 3647 times since Thu, May 2, 2019
Saving a N2KView config file to a USB device.1. Insert a USB flash drive into an available USB port on your device.2. From the main screen, tap to reveal the available tabs and select Commands and Settings on the right.3. Select tab labeled Configura... Read More
What information is available from the J1939 to NMEA 2000 Bridge (J2K100) and can be viewed on Maretron’s displays?
Viewed 3596 times since Mon, Jun 24, 2013
The J2K100 is capable of transmitting the following information:PGN 65030AC Generator CurrentAC Generator FrequencyAC Generator VoltageEngine parameters 127488, 127489TachometerEngine HoursCoolant PressureCoolant Water TemperatureEngine Oil Pressure... Read More
What information is available from the fluid pressure monitor (FPM100) and can be viewed on Maretron’s displays?
Viewed 3481 times since Fri, Jun 21, 2013
The FPM100 is capable of transmitting the following information: Pressures:Atmospheric PressureWater PressureSteam PressureCompressed Air PressureHydraulic PressureUser Defined 129 to 144Tank Types:Fuel Level, CapacityFresh Water Level, CapacityWast... Read More
I see N2KView offers a component for "Indicator Status"; what products can I use to show Indicator Status?
Viewed 3420 times since Fri, Mar 27, 2015
An Indicator Status component uses the NMEA 2000 message called "Binary Switch Bank Status" to show three condition states:OnOffErrorA RIM100, SIM100, and DCR100 all transmit the necessary message for the N2KView component to work.You can create seve... Read More
How do I set up my SMS100 address book using Maretron displays?
Viewed 3200 times since Thu, Jun 6, 2013
SMS100 Operational Requirements: Working NMEA2000 networkSMS100 text moduleDSM150/DSM250 display with firmware version 1.4.18.8 or higher N2KView software/hardware versions 3.6.2 or higherThe SMS100 requires a Maretron display to produce alert messag... Read More
I do not see video within N2KView Camera Setup; what does this mean?
Viewed 3029 times since Mon, Sep 17, 2012
If you have set the camera configuration and video still does not appear, please do the following:Confirm the PC or Maretron Display is connected to the LAN network a camera is installed. Run the Axis Camera Setup tool and confirm that the camera is ... Read More
Which Martron products work with the ALM100?
Viewed 2406 times since Wed, Jun 22, 2016
The ALM100 can be commanded to annunciate by way of Maretron Displays(excluding legacy DSM200) or PC software N2KView(alerts enabled) only. Third-Party devices, Chart-plotters, and MFDs are not compatible to with the ALM100. Read More
I see that the DCR100 has a configuration feature called Operating Mode, What does this mean?
Viewed 2235 times since Thu, Mar 23, 2017
DCR100 channels have two possible operating modes: “Normal”, in which the DCR100 channel responds to standard NMEA 2000 switching commands, and “Annunciator”, in which the channel may be connected to a power source for a sounder or a light to be acti... Read More
|
||||
|
|||||
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)