Knowledge Base
Home » Categories » Multiple Categories

N2KView Configuration Offline - Alerts & Cameras

For users setting up or reviewing N2KView configurations while off the vessel, they will identify that some viewing content may not be available to access such as Alerts and Cameras.

 

In order to acquire access to such features, we will take advantage of the Demo Mode feature.

 

When initializing N2KView, select Enter Demo Mode.

 

 

 

 

 

 

 

 

 

 

 

 

You will be able to identify if you are in Demo Mode with the Demo stamp located in the upper left-hand corner as well as actively displaying values within the gauge components.

 

 

 

 

 

 

 

 

 

While in Demo mode, load your custom configuration that you wish to view.

 

Please refer to the following article for loading an N2KView Configuration file.
- https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=697

 

 

Alerts Management 

With your custom configuration loaded

-        Tap on the display to reveal the tabs and select Commands & Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

-        Alerts Setup

 

 

 

 

 

 

 

 

-        Alert Table Editor

 

 

 

 

 

 

 

You now have full access to Create, Edit or Delete any alert parameters.

 

 

 

 

 

 

 

 

 

 

 

 

Camera Management

With your custom configuration loaded

-        Tap on the display to reveal the tabs and select Commands & Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

-        Cameras Setup

 

 

 

 

 

 

 

 

You now have full access to Create, Edit or Delete any Cameras that are available on your network.

 

 

 

 

 

 

 

 

Example of live feed streaming while initializing a new camera setup.

 

 

 

 

 

 

 

 

 

 

 

To review additional details of supported cameras within N2KView, please visit the following article.
- https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=447

 

If you have any additional questions, please contact our support team at (866) 550-9100 or via email at Support@Maretron.com.

 

Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
Which Martron products work with the ALM100?
Viewed 2091 times since Wed, Jun 22, 2016
How do I save or load a config file in N2KView?
Viewed 2832 times since Thu, May 2, 2019
I see that the DCR100 has a configuration feature called Operating Mode, What does this mean?
Viewed 1885 times since Thu, Mar 23, 2017
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 24407 times since Tue, Oct 25, 2011
Can I use the DCR100 to turn on my Marine Audio Amplifier ?
Viewed 2454 times since Tue, Jul 19, 2016
How do I load a custom configuration to N2KView Mobile?
Viewed 2325 times since Fri, Nov 4, 2016
What is the procedure for testing the ALM100 Annunciator?
Viewed 4260 times since Thu, Jan 8, 2015
Why N2K™?
Viewed 2846 times since Wed, Sep 2, 2015
Hatteland Seahawk camera integration to N2KView V3
Viewed 1120 times since Wed, Apr 14, 2021
I see N2KView offers a component for "Indicator Status"; what products can I use to show Indicator Status?
Viewed 3042 times since Fri, Mar 27, 2015
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.