Knowledge Base
Home » Categories » Multiple Categories

Can I do a custom calibration for non-standard resistance sensors or odd shaped tanks?

Yes, it is possible to program the TLA100 to accept non-standard resistive sensors or odd shaped tanks using Maretron's DSM150, DSM200, or DSM250 display. Set the mode using Maretron's DSM150, DSM200, or DSM250 display in the following way:

  1. Enter menu mode, scroll to "Configuration:" and press < Enter >
  2. Scroll to "Device Configuration:" and press < Enter >
  3. Scroll to the row containing the TLA100 and press < Enter >
  4. Scroll to "Tank Level Calibration:" and press < Enter >
  5. Scroll until you find "Custom Calibration..." and press < Enter >
  6. Follow the instructions on the screen while programming up to 16 custom calibration points
Attachments Attachments
There are no attachments for this article.
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.