Knowledge Base
Home » Categories » Multiple Categories

Can Maretron’s sensor data be displayed on a Furuno CANBUS network?

Yes, much of Maretron device's data can be shown on Furuno displays with “CANBUS” functionality. Firstly, Maretron recommends that customers verify device compatibility by reviewing the Maretron product's datasheet specifically, the transmit PGN section of the datasheet (page 2). Second, review the Chart plotters datasheet for Received PGN list for display to confirm the compatibility.

Please note: Maretron devices allow for multi message distinction for example: PGN 130314(Temperature) allows for source selection with instance number selection, a configuration that can only be adjusted using a Maretron interface. The device configuration can be performed using a Maretron DSM150/250/410 or our N2KAnalyzer software tool only.



Attachments Attachments
There are no attachments for this article.
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.