Knowledge Base
Home » Categories » Multiple Categories

Can I set the TLA100 to accept the European standard for resistance values (i.e. 10 to 180 ohms) using Maretron’s DSM150, DSM200, or DSM250 display?

Yes, it is possible to set the TLA100 to accept European standard resistive sensors using Maretron's DSM150, DSM200, or DSM250 display. Set the mode using Maretron's DSM150, DSM200, or DSM250 display in the following way:

  1. Enter menu mode, scroll to "Configuration:" and press < Enter >
  2. Scroll to "Device Configuration:" and press < Enter >
  3. Scroll to the row containing the TLA100 and press < Enter >
  4. Scroll to "Tank Level Calibration:" and press < Enter >
  5. Scroll until you find "European Standard (0-180 ohms)" and press < Enter >
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Reset Factory Defaults"; what is this?
Viewed 2261 times since Mon, Jul 21, 2008
Which Maretron products are necessary in order to display true wind referenced to water speed?
Viewed 3573 times since Wed, Apr 10, 2013
How do I display the J2K100 transmission oil temperature on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2522 times since Thu, Jan 14, 2010
How do I set a "Device Instance" for a Maretron sensor using the DSM250?
Viewed 2688 times since Tue, Sep 1, 2009
How do I know if the GPS100 is locked on and producing a position fix using Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2066 times since Tue, Jun 17, 2008
How do I reset the DST100 trip log using Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2210 times since Sun, Jun 22, 2008
How do I display the GPS100 twilight AM time on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 1929 times since Tue, Jun 17, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Damping Period:"; what is this?
Viewed 2053 times since Thu, Jun 19, 2008
How do I configure a channel on the SIM100 using Maretron’s DSM250 Display?
Viewed 1637 times since Tue, Sep 1, 2009
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a DST100 configuration setting called "Transducer Depth Offset:"; what is this?
Viewed 2826 times since Mon, Jun 25, 2012
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.