Knowledge Base
Home » Categories » Multiple Categories

What firmware changes have taken place on the Maretron CLM100 Current Loop Monitor?

You can update your device using the N2KAnalyzer tool.

 

1.2.2.4 (2021-08-11)

  • Support Generic Sensor Device
  • Support Standard NMEA2000 Label PGN (130060)

 

1.2.1.1 (2020-08-14)

  • Support Engine PGNs (CLM100 device will act as one engine node) (4027, 4594, 4603, 4619, 4645)
  • Support Transmission PGNs (CLM100 device will act as one transmission node)
  • Support Battery PGNs (CLM100 device will act as one battery node)
  • Support Vessel PGN: 130576, Trim Tab Status (4027)
  • Support DF108 (Power Extended Range (W), int32) (4619)
  • Support DF68 (Power, Low (mW), uint16) (4619)
  • Support "Percent Engine Torque" (4619)
  • Re-transmit label PGN when channel configuration change (CLM100 will monitor the change(s) every 1s to reduce the repeated label PGNs transmitted) (4181)
  • Enable 4-20 mA support in 130840

 

1.1.1.1 (2016-08-29):

  • Corrected a problem where PGN 130840 sometimes appeared in the Transmitted PGN List even though it is not being transmitted (3727)
  • Manufacturing improvements (3973)

 

1.0.5.1 (2016-06-27)

  • Manufacturing improvements

 

1.0.2.1 (2015-10-07)

  • Initial Release
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 24626 times since Tue, Oct 25, 2011
Testing a 4-20mA Transducer
Viewed 4821 times since Mon, Sep 30, 2019
What are the voltage specifications for each Maretron device?
Viewed 7573 times since Thu, Dec 22, 2011
Using N2KAnalyzer, how do I recover a Maretron device?
Viewed 4590 times since Thu, Dec 22, 2011
What sensors is the CLM100 compatible to work with?
Viewed 1914 times since Tue, Mar 8, 2016
Is the FPM100 compatible with non-Maretron 4-20 mA pressure transducers?
Viewed 3746 times since Tue, May 10, 2011
What monitoring applications can a CLM100 be used for?
Viewed 1198 times since Tue, Feb 14, 2017
Can Maretron devices be displayed on a Raymarine Seatalk NG network?
Viewed 6868 times since Wed, Feb 25, 2015
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.