Knowledge Base
Home » Categories » User Interface Software » N2KView » N2KView Videos

How do I connect my N2KView to the IPG100?

N2KView offers several different ways for connecting to a Maretron gateway (IPG100, USB100, Maretron Cloud Services).  To connect to an IPG100 on a vessel's LAN Network, please do the following:

  1. Touch the screen to display the command and screen tabs
  2. Select the "Commands & Settings" tab
  3. In the "Commands & Settings" window, select "Connections"
  4. A "Connections Settings" window will appear
  5. Any IPG100 gateways found on the local network will appear in the "Available Connections" list
  6. Select one of the IPG100's and then click on "Use Selected as 1st Connection"
  7. The "Use 1st Connection" checkbox will become checked, the network connection type will be set to "LAN" and the "Serial Number" textbox will be filled with the selected IPG100's serial number
  8. You can now click "Connect" at the bottom of the "Connections Settings" window to establish an NMEA 2000 connection to the selected gateway.

Please watch the video below.


Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
How do I change my N2KView operating mode?
Viewed 1529 times since Wed, Jan 15, 2014
How do I create a Favorite Screen component in N2KView?
Viewed 3191 times since Wed, Jan 15, 2014
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.