Knowledge Base
Home » Categories » Multiple Categories

What information is available from the fluid pressure monitor (FPM100) and can be viewed on Maretron’s displays?

 The FPM100 is capable of transmitting the following information:

  • Pressures:
    • Atmospheric Pressure
    • Water Pressure
    • Steam Pressure
    • Compressed Air Pressure
    • Hydraulic Pressure
    • User Defined 129 to 144
  • Tank Types:
    • Fuel Level, Capacity
    • Fresh Water Level, Capacity
    • Waste Water Level, Capacity
    • Live Well Level, Capacity
    • Oil Level, Capacity
    • Black Water (Sewage) Level, Capacity
    • Reserved 1-7 Level, Capacity
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
How do I set the J2K100 configuration setting called "J1939 Source Address:" using Maretron’s DSM150 or DSM250 display?
Viewed 2980 times since Thu, Jan 14, 2010
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Zero Offset Calibration..."; what is this?
Viewed 2169 times since Sat, Jul 19, 2008
What are the minimum and maximum supported display resolutions for the MBB100 VGA output?
Viewed 3076 times since Tue, Sep 4, 2012
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Invert Installation:"; what is this?
Viewed 2103 times since Tue, Jun 17, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "NMEA 2000 PGN Enable/Disable..."; what is this?
Viewed 2004 times since Fri, Jun 20, 2008
How do I set up the EMS100 for my Yanmar engine?
Viewed 4901 times since Tue, May 10, 2011
I see that the DCR100 has a configuration feature called Operating Mode, What does this mean?
Viewed 911 times since Thu, Mar 23, 2017
How do I display the GPS100 status using Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2233 times since Tue, Jun 17, 2008
How do I make the SSC200 agree with other compasses on the vessel, or, in other words, how do I align the SSC200 with the boat?
Viewed 2338 times since Mon, Jun 25, 2012
Which Maretron products are necessary in order to display true wind referenced to water speed?
Viewed 3779 times since Wed, Apr 10, 2013
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.