Knowledge Base
Home » Categories » Multiple Categories

How do I set up my SMS100 address book using Maretron displays?

SMS100 Operational Requirements: 

  • Working NMEA2000 network
  • SMS100 text module
  • DSM150/DSM250 display with firmware version 1.4.18.8 or higher 
  • N2KView software/hardware versions 3.6.2 or higher

The SMS100 requires a Maretron display to produce alert messages for the SMS100 to transmit via cellular services. You will need to set up a phone book within the Maretron Display's SMS section.

On the DSM150 or DSM250, go to the main menu, and then select "Alert Setup...":

Step 1:



Step 2:




In N2KView the SMS100 address book is located within the "Connections Settings" window.



Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
What firmware changes have taken place on the Maretron DSM410?
Viewed 1103 times since Tue, Jul 14, 2020
How do I display the J2K100 transmission gear on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3726 times since Thu, Jan 14, 2010
How do I display temperature from a TMP100 on the Maretron DSM250 Display?
Viewed 2492 times since Tue, Sep 1, 2009
I navigate using magnetic heading and not true heading; how do I use the SSC200 compass and Maretron’s DSM150, DSM200, or DSM250 display to view my heading in magnetic?
Viewed 3425 times since Thu, Jun 19, 2008
I see that Maretron’s DSM150, DSM200 and DSM250 displays have TLA100 configuration settings called "Gauge Resistance, + to sender:" and "Gauge Resistance, - to sender:"; what are these?
Viewed 3448 times since Mon, Jun 25, 2012
Does Maretron offer a DSM410 Gimble mount?
Viewed 24256 times since Wed, Jan 24, 2018
How do I display the GPS100 Speed Over Ground (SOG) using Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2613 times since Tue, Jun 17, 2008
I see that Maretron’s DSM150, DSM200 and DSM250 displays have a WSO100 configuration setting called "Installation Offset Calibration..."; what is this?
Viewed 3989 times since Mon, Jul 21, 2008
How do I display the GPS100 sunset time on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2814 times since Tue, Jun 17, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Zero Offset Calibration..."; what is this?
Viewed 2671 times since Sat, Jul 19, 2008
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.