Knowledge Base

KB Home | Search | Glossary | Ask Question |

English

I do not see video within N2KView Camera Setup; what does this mean?

Article Number: 553 | Rating: Unrated | Last Updated: Thu, Jul 27, 2017 6:52 PM

If you have set the camera configuration and video still does not appear, please do the following:

Confirm the PC or Maretron Display is connected to the LAN network a camera is installed.
Run the Axis Camera Setup tool and confirm that the camera is visible in the list of cameras displayed by the tool.
Confirm that the IP address of the camera matches the IP address you have set in the Camera Setup of N2KView.
Confirm that port 80 is not blocked by your computer's firewall software.

Attachments

Attachments

There are no attachments for this article.

Related Articles

How do I set up my SMS100 address book using Maretron displays?

Viewed 3200 times since Thu, Jun 6, 2013

What is the serial port Pinout of CAN1 and CAN 2 located on the MBB200C?

Viewed 3697 times since Thu, Mar 16, 2017

How do I load a custom configuration to N2KView Mobile?

Viewed 2793 times since Fri, Nov 4, 2016

Which touch screen drivers work with the MBB100 and MBB200C?

Viewed 2795 times since Tue, Dec 3, 2013

Which Martron products work with the ALM100?

Viewed 2406 times since Wed, Jun 22, 2016

How to add N2KView to Windows Startup

Viewed 2516 times since Mon, Apr 22, 2019

How do I set up My Maretron Telemetric Cloud Service?

Viewed 3336 times since Mon, Oct 24, 2016

How do I install N2KView on my MacBook?

Viewed 3376 times since Fri, Jan 18, 2013

What information is available from the J1939 to NMEA 2000 Bridge (J2K100) and can be viewed on Maretron’s displays?

Viewed 3596 times since Mon, Jun 24, 2013

What are the voltage specifications for each Maretron device?

Viewed 8315 times since Thu, Dec 22, 2011

Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.