Knowledge Base
Home » Categories » Tank Monitoring » TLA100

What messages (or PGNs) does the TLA100 transmit?

The TLA100 transmits the following messages (or PGNs):

  • PGN 127505 - Fluid Level (Fields: 1-Fluid Instance, 2-Fluid Type, 3-Fluid Level, 4-Tank Capacity)
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
What are the voltage specifications for each Maretron device?
Viewed 6261 times since Thu, Dec 22, 2011
I see that Maretron’s DSM150, DSM200 and DSM250 displays have TLA100 configuration settings called "Gauge Resistance, + to sender:" and "Gauge Resistance, - to sender:"; what are these?
Viewed 2978 times since Mon, Jun 25, 2012
What type of information can be viewed on Maretron’s display products, and what products are required to generate the data to be displayed?
Viewed 13244 times since Tue, Oct 25, 2011
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Tank Capacity:"; what is this?
Viewed 2507 times since Thu, Jun 19, 2008
If the TLA100 is connected and configured to operate in the "NMEA 2000 & Analog Gauge" mode, how do I connect the wires to the back of the analog gauge?
Viewed 2236 times since Sun, Jun 22, 2008
Using N2KAnalyzer, how do I recover a Maretron device?
Viewed 3282 times since Thu, Dec 22, 2011
If the TLA100 is connected and configured to operate in the "NMEA 2000" mode (i.e., without an analog gauge), how do I connect the wires to the resistive sensor?
Viewed 1866 times since Fri, Jun 20, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Reset Factory Defaults"; what is this?
Viewed 2241 times since Fri, Jun 20, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Tank Number:"; what is this?
Viewed 2855 times since Thu, Jun 19, 2008
Why doesn’t my tank display doesn’t read full when the tank is full?
Viewed 2222 times since Thu, Jun 19, 2008
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.