Knowledge Base
Home » Categories » Multiple Categories

How do I save and load a configuration file for a TLM100, TLM150, or TLM200 using N2KAnalyzer?

N2KAnalyzer has a feature that allows for the user to load a saved configuration table onto a TLM100,TLM150, or TLM200 on the NMEA 2000 network. To load a configuration file, use the following process:

  1. Start the N2KAnalyzer program.
  2. Select a gateway to access your N2K Network.
  3. Select the TLM100, TLM150, or TLM200you wish to configure.
  4. Right-Click on the row containing the TLM100, TLM150, or TLM200 and select "Configure Device"
  5. A pop-up window will appear with several options to configure the TLM100, TLM150, or TLM200

  6. Select "Load Configuration From File" A browse window will appear allowing you to select the configuration file for the TLM100, TLM150, or TLM200.

  7. Lastly, the table within the configuration window will have new values loaded in red. Select  " Put Config to Device" to finalize configuration.

Attachments Attachments
There are no attachments for this article.
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.