Maretron Model | Device Description | NMEA2000 Operating Voltage | Engine/Battery Interface | |
CLM100 P/N: M000070 | Current Loop Monitor | 9 to 32 Volts | ||
SSC200 P/N: M000001, M000021, M000022 | NMEA 2000 Solid State Compass HW 1.0 | 9 to 16 Volts | ||
SSC300 P/N: M000051 | NMEA 2000 Solid State Compass | 9 to 32 Volts | ||
USB100 P/N:
|
NMEA 2000 / NMEA 0183 Gateway | 9 to 16 Volts | ||
USB100 P/N:
|
NMEA 2000 / NMEA 0183 Gateway | 9 to 32 Volts | ||
DSM200 | NMEA 2000 Multi-function Display | 9 to 16 Volts | ||
GPS100 P/N:M000004 | NMEA 2000 GPS Antenna / Receiver | 9 to 16 Volts | ||
GPS200 P/N:M00036, M000062 |
NMEA 2000 GPS Antenna / Receiver | 9 to 32 Volts | ||
EMS100 | NMEA 2000 Engine Monitoring System | 9 to 16 Volts | 9 to 32 Volts | |
J2K100 P/N: M000006 | J1939 to NMEA 2000 Converter | 9 to 16 Volts | ||
J2K100 P/N: M000048 | J1939 to NMEA 2000 Converter | 9 to 32 Volts | ||
WSO100 P/N: M000007, M000008 | NMEA 2000 Weather Station Outdoor | 9 to 16 Volts | ||
DST100 | NMEA 2000 Depth / Speed / Temp | 9 to 16 Volts | ||
DST110 | NMEA 2000 Depth / Speed / Temp | 9 to 16 Volts | ||
N2KMeter | NMEA 2000 Diagnostic Tool | 0 to 25 Volts | ||
TLA100 | Tank Level Adapter | 9 to 16 Volts | ||
RAA100 | Rudder Angle Adapter | 9 to 16 Volts | ||
KHA100 | Keel Height Adapter | 9 to 16 Volts | ||
DSM250-01 | DSM250 Color Multi-function Display (Black Case) | 9 to 32 Volts | ||
DSM250-02 | DSM250 Color Multi-function Display (Gray Case) | 9 to 32 Volts | ||
DSM250-03 | DSM250 Color Multi-function Display (White Case) | 9 to 32 Volts | ||
DSM410 |
DSM410 4.1" High Bright Color Display | 9 to 30 Volts | ||
DCM100 P/N: M000026 | DC Monitor | 9 to 32 Volts | 9 to 32Volts | |
ACM100 | AC Monitor | 9 to 36 Volts | ||
SIM100 | Switch Indicator Module | 9 to 32 Volts | ||
RIM100 | Run Indicator Module | 9 to 32 Volts | ||
ALM100 | Alarm Enunciator (Waterproof) | 9 to 32 Volts | ||
TSM800 P/N:M000052 |
vessel monitoring and control touchscreen | 24 to 32 Volts | ||
TSM800C P/N:M00058 |
vessel monitoring and control touchscreen with N2K connection | 9 to 32 Volts | 24 to 32 Volts | |
TSM1330 P/N: M000058 | vessel monitoring and control touchscreen | 9 to 32 Volts | 24 to 32 Volts | |
TSM1330C P/N: M000059 | vessel monitoring and control touchscreen with N2K connection | 9 to 32 Volts | 24 to 32 Volts | |
TMP100 | Temperature Module | 9 to 32 Volts | ||
TLM100 | Tank Level Monitor | 9 to 16 Volts | ||
TLM150 | Tank Level Monitor | 9 to 16 Volts | ||
TLM200 | Tank Level Monitor | 9 to 16 Volts | ||
IPG100 | Internet Protocol Gateway | 9 to 32 Volts | ||
FPM100 | Fluid Pressure Monitor | 9 to 32 Volts | ||
FFM100 | Fluid Flow Monitor | 9 to 32 Volts | ||
NBE100 | Network Bus Extender | 9 to 32 Volts | ||
DCR100 | DC Relay Module | 9 to 32 Volts | ||
SMS100 | Short Message Service | 9 to 32 Volts | ||
E2000 | Wifi Router | 12 Volts | ||
E2500 | Wifi Router | 12 Volts | ||
MBB100 | Maretron Black Box Computer | 9 to 32 Volts | 9 to 36 Volts | |
MBB200C | Maretron Black Box Computer | 9 to 32 Volts | 9 to 36 Volts | |
MBB300C | Maretron Black Box Computer | 9 to 32 Volts | ||
VDR100 | Vessel Data Recorder | 9 to 32 Volts | ||
DSM800 | Touch Screen Computer | 12 Volts |
Home » Categories » Multiple Categories |
What are the voltage specifications for each Maretron device? |
Article Number: 439 | Rating: 5/5 from 1 votes | Last Updated: Wed, May 17, 2017 7:57 PM
|
Attachments
![]() There are no attachments for this article.
|
Does Maretron have a Linux driver for the USB100?
Viewed 19145 times since Fri, Sep 11, 2009
With regards to the DST100, what is the difference between the trip log and the total log?
Viewed 2382 times since Tue, Jun 17, 2008
Does Maretron offer quick setup instructions for a dual J2K100 setup?
Viewed 2291 times since Wed, Jan 15, 2020
What information is available from the temperature monitor (TMP100) and can be viewed on Maretron’s displays?
Viewed 4207 times since Fri, Jun 21, 2013
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Tank Type:"; what is this?
Viewed 3590 times since Sun, Jun 22, 2008
How do I reset the RAA100 to send the factory default messages (or PGNs)?
Viewed 3044 times since Fri, Jul 11, 2008
How do I configure a channel on the SIM100 using Maretron’s DSM250 Display?
Viewed 2446 times since Tue, Sep 1, 2009
What are the basic configurable parameters for the TLM100 and how do I configure them using a DSM250?
Viewed 4540 times since Wed, Oct 7, 2009
What are the latest changes that have been made to N2KView on Maretron’s Legacy Devices?
Viewed 12358 times since Thu, Apr 3, 2014
Does the DCR100 provide overcurrent circuit protection?
Viewed 3178 times since Thu, Apr 28, 2011
|