What type of watermakers are
compatible with the DSM250?
DSM250 firmware version 1.4.3 and higher supports only two Sea
Recovery watermaker: Aqua-Matic and the Aqua-Whisper .
There is only one favorite screen type available on the DSM250 for
the water-maker information. You can find this screen under “Favorite Screen
Setup” in the data category “Special Device”
The Favorite screen can only be configured as a full screen.
The DSM250 shows the following information
Operation State Production
Rate Salinity Status
Pre-Filter Pressure Post-Filter
Pressure Operation
Pressure
Pre-Filter Status Post Filter
Status Operation
Status
Filter Status System
Status